RTS Cstrunk, Руководство пользователя

Страница: 9 / 35

.
Menu Selection
Using a
Mouse
You
must install the mouse and its software prior to running CStrunk. Follow the instructions
that came with your mouse. If there is a choice, install your mouse as a
compatible mouse.
Note
If your mouse does not work, the CStrunk port setting for communication with
the Trunking Master Controller may be incorrect. (CStrunk may be trying to
communicate with the Trunking Master Controller using the port to which your mouse
is connected.) To change the
port setting, see Options Menu, page 3-4.
To use a mouse with CStrunk:
1.
From the CStrunk menu bar, point and click the left mouse button on a menu to open it.
2. Point and click the left mouse button on a menu item to select that item.
3.
To cancel a selection, click on any selectable item with the right mouse button. To close
a menu and return to the menu bar, click on any menu item with the right mouse button.
CSTRUNK EDITING SCREENS
Figure 1-3 shows a typical editing screen in CStrunk. This screen contains two windows. The
window at the left is an edit table to
trunks.
This table has several columns in which
you
enter information to configure the
trunks.
The window at the right is a pick list from which
you can pick items to insert into the edit table as you configure the Trunking Master Controller.
Some pick lists open up into sub lists when you pick items.
lelp F i l e Trunks Intercoms S t a t u s Sort Screen Log Options Master
C
. l e : On-Line
Trunk Line Assi
.....
.....
...
.....
...
.....
.....
.....
in
...
...
.
Select Intercom
J H P
HUB
J P H
I
Mode: On-Line
Figure 1-3. Typical CStrunk Edit Screen
1-4
CStrunk User Manual