IMPORTANT:
IF YOU HAVE
A
CGA MONITOR.
Do
not select "Force
Mono"
unless you know that your computer also supports monochrome
operation. Most CGA machines abort when forced to monochrome. If you select "Force
Mono" and the computer aborts, proceed as follows:
1.
Reboot the computer, but do not run CStrunk.
2.
Erase the file
3.
Run CStrunk. CStrunk will revert to the default color selection.
NOTE TO LAPTOP COMPUTER
USERS
Many LCD laptop computers emulate the CGA video interface. The important note above
applies to most of these machines as well.
A
further consideration is that many of these
machines map color selections to grey-scale values. There are
no standards for this mapping,
so on some machines, the standard CStrunk color scheme will not be readable. If this is the
case, you may have to make changes in the
file. See
Screen
Colors,
page
3-1.
Help File Trunks Intercoms Status
Screen
Log
Options Master
Color
and
Mono Setup
Mode:
Automatic
Mode: On-Line
Figure
3-2.
Color Monochrome
Setup
Screen
Options, Communications
This menu item
is used to set the comm port and baud rate for communication between the
computer and the Trunking Master Controller. If the computer cannot get on-line with the
Trunking Master Controller, check the comm port and baud rate settings as follows:
comm
Port
1.
From the Options menu, select
The communications setup screen
should appear (Figure
3-3).
CStrunk
User
Manual
3-5
