SECTION 2
EDITING PROCEDURES
INTRODUCTION
The following editing procedures are arranged in the general order that you would typically
use them when creating a new trunking configuration file.
ASSIGNING NAMES FOR INTERCOM SYSTEMS
From the
menu, select "Names". The edit screen for intercom names should
appear (Figure 2-1). Up to 12 intercom systems can be connected to the Trunking Master
Controller,
so
CStrunk lets you assign
up
to 12 intercom system names. Names can be any
combination of up to four characters.
Note
The
numbers are not the actual hardware ports on the Trunking Master
Controller. They are just arbitrary numbers that CStrunk associates with each
intercom name.
As
you will see in a moment, any intercom name can be "mapped"
to any port of the Trunking Master Controller. For now, enter names of intercom
systems in any order that you wish.
Help File
Trunks
Intercoms Status Sort Screen Log Options Master
On-Line
Intercom Names
10
1 1
Mode: On-Line
Figure
2-1.
Intercom Name Assignment
