SECTION 1
GETTING STARTED
INSTALLING CSTRUNK
The minimum requirement to run CStrunk is a 386 computer with at least 2M of extended
memory (4M preferable). Also, CStrunk should not be installed to run under any other
operating system other than DOS.
To
install CStrunk: insert the CStrunk disk, then change to the drive where the disk is
inserted. Type
install
and press the
ENTER
key.
Store the original disk in
a
safe place.
STARTING CSTRUNK
Change to the drive and directory where the CStrunk files are located. Type
cstrnk,
then
press the
ENTER key.
CSTRUNK START-UP ROUTINE
When CStrunk is started, it will present the CStrunk menu screen (Figure 1-1). Next, it will
check for a connection to the Trunking Master Controller. If it finds a connection, it will
upload the current trunk configuration file from the Trunking Master Controller. While
CStrunk is uploading the configuration, it will report the percentage completed at the bottom
of the menu screen.
Note
The default port for communication between the computer and the Trunking Master
Controller is
and 19.2 kbaud. If the trunk configuration file does not upload,
check the CStrunk COM port setting. See
Options Menu,
pages
3-4
to 3-7.
Note
If
you are using a laptop computer or other computer with a monochrome display,
you
will have to change the CStrunk color mode for proper screen display, See
Menu,
pages
3-4
to
3-7.
CStrunk
User
Manual
