.
.
INTRODUCTION
This manual describes the CStrunk Trunking Configuration Software for the RTS Digital
Matrix Intercom Systems. The manual is divided into three sections.
Section
I ,
Getting
Started,
briefly describes basic CStrunk operation.
Section
2,
Editing Procedures,
provides
step-by-step procedures for the most commonly used features of CStrunk.
Section
3,
Reference,
provides additional information about CStrunk features.
IF YOU ARE IN
A HURRY!
If you wish to run CStrunk immediately, simply insert the CStrunk disk in your computer,
type
cstrnk,
and press the ENTER key.
If
you encounter problems while using the CStrunk
menus, press the
key on your computer keyboard to get help for the CStrunk screen that
you are currently viewing.
VERSION NUMBERS
The information contained in this manual applies to the following software and Trunking
Master Controller versions:
version:
7
Trunking Master Controller version: 7
The CStrunk version number should be imprinted on the software diskette. CStrunk and
master controller version numbers are
also available while running CStrunk (see
Status,
Diagnostics,
page 3-9.
COMPUTER REQUIREMENTS FOR CSTRUNK
An
or compatible personal computer with at least
of extended memory (4M
recommended). CStrunk cannot be run under any other operating system other than
DOS.
A
serial mouse (optional). Two serial ports required for use with a mouse,
with
as the default port for the Trunking Master Controller connection.
