Rottler F103 Series, Руководство по установке, эксплуатации и обслуживанию

Страница: 68 / 318

Section 4 Control Definitions F103/4/5A Manual
www.rottlermfg.com
4-14
Bore Buttons
Pressing this button once will cause it to turn yellow. This indicates when the “Bore Left” button is
pressed this cylinder will not be bored.
Touching this button again (with a pause in between touches) will turn the button back to green. All green
bores will be bored if the “Bore Left” button is pressed. The control will ask you if you sure you want to
bore the selected bores.
Double Clicking a Bore button will keep it green and turn all other bore buttons yellow.
Indicated
This screen is designed to manually indicate each cylinder in for it’s specific location.
Set Buttons
Once a cylinder has been indicate, pressing the associated Set Button will take the current machine
position and place the values in the Data Box associated with that cylinder.
Copy Values
Pressing this button will bring up another window where you can select to copy the In/Out and Horizontal
values from Blueprint, Indicated or Probed screen.
Difference
Checking this Box will cause a green check mark to be placed in the box. The Data Boxes will then
display the difference in values from the blueprint screen to the indicated screen. This is helpful to know
how far the cylinders actual location is from blueprint values.
Bore Left and Right
Pressing this button will cause the entire Left or Right bank to be bored automatically. The Bore buttons
that are yellow will not be bored though.