48
May 2013
IMO_294_EN_v0
Roto E-Tec DoorDrive
Subject to change.
Risk assessment
Inspecting and checking possible hazard points and protection measures as per DIN EN 16005
Hazard points and protection measures
Hazard point
Measure undertaken
Remark
Risk of cutting
Use of safety glass in sash and side
part; no sharp edges on door sash,
on door panel or on side part
(combined).
Risk of tripping
No obstacles in passage area; no
threshold or step in passage area
(thresholds and platforms ≤ 20 mm).
This must be taken into
consideration during the
planning phase!
Risk through weathering, e.g. ice in
front of door, etc.
Protection against weather
influences.
The door installation position
is to be chosen to match the
planning requirements
, e.g.
through installation in the reveal,
protection through canopy, not
to be installed on weather side,
no heavy shadow or direct
sunlight.
Risk though operating error
Operation of opening/closing func-
tion for authorised people only
(Operator = “Builder”) instruction of
user group (builder, resident)
The door operator is responsible for
its safe operation.