Subject to change.
Roto E-Tec DoorDrive
IMO_294_EN_v0
May 2013
7
General information
Instruction obligation of target groups
Responsibility of hardware dealer
The hardware dealer must forward the following documents to the
door
manufacturer:
– Catalogue
– Installation, maintenance and operation instructions
Responsibility of the door manufacturer
The door manufacturer and the customer must conduct a risk assessment
(refer to page 45 - 49) in accordance with DIN EN 16005:
– Installation, maintenance and operation instructions
The manufacturer must ensure that the end-user is provided with the docu-
ments and information intended for them, in printed format.
Responsibility of specialised dealer / installation company
The specialised dealer must forward the following documents to the
builder, even when a subcontractor (installation company) is acting as an
intermediary:
– Maintenance and operating instructions (with the focus on hardware)
The specialised dealer and the customer must conduct a risk assessment
(refer to page 45 – 49) in accordance with DIN EN 16005.
Responsibility of builder
The builder must forward the following documents to the end user:
– Maintenance and operating instructions (with the focus on hardware)
– Specifications/information for end-users (VHBE)