Subject to change.
Roto E-Tec DoorDrive
IMO_294_EN_v0
May 2013
41
Long-term dependability and reliable operation of the automatic door can
be assured through regular maintenance.
Have maintenance conducted at least once annually by qualified personnel.
Qualified personnel is trained for the following specified work. If, during
initial operation, the end user is also given instruction, then the mainte-
nance described here can also be performed by the end user. Your Roto
specialist dealer will be only too glad to provide you with assistance.
Install certified genuine replacement parts only.
Your Roto specialist dealer will provide you with replacement parts.
SAFETy!
Danger through moving door sash
Risk of injuries through crushing or shearing
– Before performing any mechanical work on the swing door drive,
disconnect it from the power supply,
– Secure door against moving, e.g. with a door stopper.
– Do not touch the closing edge when checking functions.
– Keep children away from the working area.
Property damage through incorrect handling
– The electronic circuit must not come into contact with water.
– Do not open door sash any further than 105°.
General maintenance
1
2
3
5
7
6
4
Maintenance points
1
Angle bracket / coupling rod
2
Fastening of swing door drive
3
Door latch
4
Electronic circuit
5
Power supply unit
6
Fastening of door frame
7
Cable junction
1
2
Checking angle bracket and coupling rod
– The fixing screws of the angle bracket
2
and the coupling rod
1
must
not be loose.
– Re-tighten loose screws using screwdriver finger tight.
– Check angle bracket and coupling rod for obvious damage and visible
signs of wear.
– Have damaged parts replaced by qualified personnel.
Maintenance
