Ross Carbonite Black Скачать руководство пользователя страница 9

Страница: 9 / 56

Contents

Features.............................................................11

Analog Reference Input and Output.....................................11

UHDTV1 Video Formats....................................................... 11

Integrated Up/Down Converters........................................... 11

Custom Controls................................................................... 11

Device Control...................................................................... 11

DVE (Fly Key).......................................................................11

Effects Dissolve.................................................................... 11

General Purpose Interface (GPI)..........................................11

LiveEDL.................................................................................11

Media-Store...........................................................................11

MediaWipe............................................................................ 12

UltraChrome 2.......................................................................12

MemoryAI Recall Mode........................................................ 12

Memory System.................................................................... 12

ME Effect System................................................................. 12

MiniME

™

................................................................................ 12

DashBoard Integration.......................................................... 12

MultiViewer............................................................................12

Clean Feed Output............................................................... 13

Pattern and Matte/Wash Generators.................................... 13

Matte/Wash Generator..........................................................13

Tally Outputs......................................................................... 13

Network Connections...................................... 14

Frame Network Setup (Ethernet)........................................ 14

Connecting to the Switcher from DashBoard.........14

To Change the IP Address....................................14

Frame Network Setup (Serial).............................................14

To Set an IP Address Using DHCP.......................14

To Set a Static IP Address....................................15

Panel Network Setup............................................................15

To Configure the Network Setting......................... 15

To Assign a Custom Name................................... 15

FTP Connection (RossLinq)................................................. 16

To Create an FTP Connection with Windows 7..... 16

Video Reference............................................... 17

Supported Reference Formats............................................. 17

Reference and Video Mode Setup....................................... 17

To Set a Video Mode............................................ 17

Frame Sync and Format Conversion....................................17

Supported FSFC Video Formats..........................18

To Set Up Input FSFC...........................................18

To Set Up Output FSFC........................................18

Output Reference Synchronizers..........................................18

To Set Up an Output Reference Sync................... 18

To Set Color Framing for Analog Reference..........19

Video Input Setup............................................ 20

Input Format Type................................................................ 20

To Configure The Input Format Type.................... 20

Auto Key Setup.....................................................................20

To Set Up an Auto Key Association...................... 20

Source Names...................................................................... 21

To Set Up a Source Name....................................21

To Assign a TSL ID to a Video Input.....................21

Control Panel Button Inserts.................................................22

To Install a Button Insert....................................... 22

Bus Maps..............................................................................22

To Create a Bus Map............................................23

To Reset the Bus Map.......................................... 23

GPI Device Control...............................................................23

To Assign a GPI to a Video Source.......................23

Video Outputs...................................................24

Output Sources..................................................................... 24

To Assign a Source to an Output.......................... 24

Ancillary Data........................................................................24

To Strip or Pass Ancillary Data............................. 24

FlexiClean Clean Feed......................................................... 25

To Set Up Clean Feed.......................................... 25

External Layer Mode............................................................ 25

To Set Up Layer Mode..........................................25

MultiViewer............................................................................25

Carbonite Black+/Carbonite Black+ 12G

MultiViewer Sources.......................................25

To Set Up a MultiViewer....................................... 26

To Set Up a MultiViewer Clock..............................27

On-Air Setting....................................................................... 27

To Set the On-Air Status for an Output................. 27

Tallies.................................................................................... 28

To Set Up a Tally.................................................. 28

Media-Store Audio Output...............................29

To Assign Media-Store Audio to an AES Output.................. 29

Color Correction...............................................30

Proc Amp Color Correction.................................................. 30

To Apply a Proc Amp to a Video Source............... 30

To Apply a Proc Amp to a Video Output................30

RGB Color Correction...........................................................31

To Apply a RGB Color Correction to a Video

Source............................................................ 31

To Apply a RGB Color Corrector to a Video

Output.............................................................32

ViewControl.......................................................33

Connecting ViewControl........................................................33

To Set Up The Video Input for ViewControl...........33

To Set Up the MultiViewer for ViewControl............33

Switcher Personality........................................34

Auto Remove Key.................................................................34

To Set the Auto Remove Key Behavior.................34

Auto Trans Second Press.....................................................34

To Set the Auto Trans Second Press Behavior......34

Background Double-Press.................................................... 34

To Set the Background Double-Press

Behavior..........................................................34

Color Schemes..................................................................... 34

To Select a Panel Color Scheme.......................... 34

To Create a Custom Panel Color Scheme.............35

To Set the Brightness of the Control Panel

Buttons............................................................35

Double-Press Rate................................................................35

To Set the Double-Press Rate.............................. 35

Editor Mode...........................................................................35

To Set the Switcher to Editor Mode.......................35

Memory Bank Button Behavior.............................................35

To Set the Bank Button Behavior.......................... 35

Next Button Secondary Function..........................................35

To Set the NEXT Button Secondary Function........35

Next Transition Reset........................................................... 36

To Set the Next Transition Reset Behavior............36

Next Transition Toggle.......................................................... 36

To Set the Next Trans Toggle................................36

Power-Save Mode................................................................ 36

To Set the Power Save Mode and Timer...............36

Roll GPO/Roll Clip................................................................ 36

To Set the Roll GPO/Clip Behavior....................... 36

Shift Toggle........................................................................... 36

To Set the Shift Toggle..........................................37

Carbonite Black Setup Manual (v14.0) — Contents •

Содержание Carbonite Black

























































Результаты поиска

Содержание Carbonite Black

Отзывы:

Ross Carbonite Black, Руководство по установке, Страница: 9 / 56

Результаты поиска

Содержание Carbonite Black

Отзывы: