Ross Carbonite Black, Руководство по установке

Страница: 25 / 56

Mode button to select whether ancillary data is
stripped or passed.
•
N StrpN Strip — ancillary data is stripped
• N Pass
— ancillary data is passed unmodified
• L StrpL Strip — ancillary data and some
lines of active video are replaced with black
• L Pass — ancillary data and some lines of
active video are passed unmodified
FlexiClean Clean Feed
FlexiClean clean feed provides a second program
output per ME that is derived from a different point in
the video layering than the standard program output.
The clean feed can be set to come before any key in the
video layering for an ME. This allows you to remove
particular keys without affecting the primary program
output.
Figure 7: Possible Clean Feed Points
Keep the following in mind when working with
clean feeds:
• Recalling a memory register using MemoryAI
may cause the clean feed output to look different
than expected. MemoryAI allows key elements
to be recalled to other keys than originally stored,
resulting in different key layering.
To Set Up Clean Feed
1. Press MENU > System . Click Navigation
Menu > Configuration > System
2. Use the Clean knob to select which key the clean
feed is taken before. Click an
ME
X
Clean Feed
button to select which key the clean feed for that
ME is taken before.
The selected key, and all keys after it, are not
included in the clean feed output.
External Layer Mode
The clean feed for an ME is used to create a composite
alpha from the keyers on that ME that is then available
as a single alpha source. This allows you to output
both the video and alpha from an ME to an external
switcher. The key video comes from the output of the
ME and the key alpha comes from the clean feed of the
ME.
The alphas that are included in the layer mode output
are set with the keyer buttons in the next transition
area. Toggle a keyer button on to include the alpha
from that keyer in the layer mode output.
When layer mode is turned on for an ME, you are
restricted to cut, dissolve, and wipe transitions.
MediaWipe and DVE transitions are not available.
Tip:
To use layer mode internally, select the clean feed for the
ME that is set to layer mode as the alpha for an auto key on a
MiniME
™
.
To Set Up Layer Mode
1. Press MENU > System > NEXT > NEXT >
NEXT > NEXT > NEXT .
2. Press the LyrMod knob to select the ME that you
want to set the layer mode for.
•
M
X
— ME
3. Use the LyrMod knob to turn the layer mode
feature on ( On ) or off ( Off ).
MultiViewer
The MultiViewer allows you to view multiple video
sources from a single output BNC. Video inputs or
outputs on the switcher, including Program, Preview,
and Media-Store channels, can be assigned to any box
on the MultiViewer. Up to 4 (1 on Carbonite Black)
MultiViewer outputs are supported.
A time-clock can be added as an overlay to the
MultiViewer showing either system time or time code.
Keep the following in mind when working with a
MultiViewer:
• All MultiViewer outputs are in 1080p.
• MultiViewer 1 output is fixed to output BNCs 1
and 2.
• On Carbonite Black+ and Carbonite Black+ 12G
the additional MultiViewer outputs (2, 3, and 4) are
fixed to output BNCs MV 3, 4, and 5.
• The layout is configured independently for each
MultiViewer.
• Inputs are displayed with a red border when they
are on-air. A green border is displayed when the
input is selected on the Preset bus.
• All ancillary data is stripped from the MultiViewer
outputs.
Carbonite Black+/Carbonite Black+ 12G
MultiViewer Sources
The dedicated MultiViewer outputs only have access to
specific inputs and outputs.
Carbonite Black Setup Manual (v14.0) — Video Outputs • 25