Ross Carbonite Black, Руководство по установке

Страница: 28 / 56

2. Use the Type knob to select the type of switcher
output.
•
ME — the program output of an ME.
• Aux
— the output of an Aux bus.
• MiniME — the program output of the
MiniME
™
.
3. Use the Index knob to select the particular
switcher output.
For example, if you select type as
Aux , an index
selection of 8 corresponds to Aux bus 8.
4.
Use the
OnAir
knob to select whether the output
is considered on-air ( On ) or not ( Off ).
5. Click an Always OnAir button for a output to
select whether the output is considered on-air
(
On
) or not (
Off
).
Tallies
Tallies are simple contact closure relays that the
switcher uses to signal other devices, and users, that a
particular video source is on-air. Typically, tallies are
used to light a red light on a camera to show people
that they are on-air and what camera they should be
looking at.
To Set Up a Tally
1.
Press
MENU
>
Config
>
NEXT
>
Tally
.
2.
Press the
Add
knob.
If you are editing, or deleting, an existing tally,
use the
Add
knob to select the tally and press the
Edit , or Delete , knob.
3. Use the Tally knob to select the tally or GPI
output that you want to set up. This is the tally or
GPI number, not the pin on the tally connector.
Note: A GPI must be set to tally mode before it can be
used as a tally. Refer to To Set Up a GPI Output on page
40 for information in setting a GPI as a tally.
4. Use the Input knob to select the video source that
you want to tally.
•
XX — video inputs 1-9
•
BK — black
• NoSrc
— no source
• BG — matte generator
• M X — Media-Store channel 1-2
5. Use the Output knob to select the bus that you
want to video source tallied for. When the video
source is selected on this bus, the tally is triggered.
•
OnAir
— on-air
• OnPrv — on preview
6. Press the Tally knob.
Related information
Tally Port
on page 50
28 • Video Outputs — Carbonite Black Setup Manual (v14.0)