Ross Carbonite Black, Руководство по установке

Страница: 43 / 56

LiveEDL Data Capture
Capturing EDL data is manually started and stopped
from the switcher. When you select to start capturing
EDL data, and GPI outputs set to trigger on start are
triggered. If a pre-delay has been set for the GPIs, the
switcher does not start capturing EDL data until the
pre-delay time has finished.
When you stop capturing EDL data, you have the
option to delete the data, or save it to a USB drive.
You can also connect to the switcher via FTP and
download the files directly to your editing suite. Use
the username liveedl and password password to
create the FTP connection to the switcher.
Keep the following in mind when reviewing the
EDL data from the switcher:
• When a MediaWipe is selected as the transition
type, the switcher records the transition duration as
the cut point frame multiplied by two (2). This is to
ensure that the cut point is recorded accurately.
• If you used more than one ME, or Aux bus, in
your shot, a separate EDL file is saved for each
ME and Aux bus. The ME re-entry is shown as
being selected on the first ME, and the source
selections on the second ME are saved to the
separate LiveEDL file. Aux bus information is only
stored to a LiveEDL file when the Aux bus is not in
fixed mode.
To Start Capturing EDL Data
The EDL data can be stored to one of 1000 LiveEDL
files stored on the switcher. A separate file is created
for each ME when the additional MEs are used.
1. Press MENU > User > LivEDL .
2. Use the Start knob to select the LiveEDL file on
the switcher that you want to store the EDL data
to.
If the LiveEDL file already contains data, you are
given the option to delete the data, or save it to a
USB.
3.
Press the
Start
knob to start recording.
To Stop Capturing and Save EDL Data
1. Press MENU > User > LivEDL .
2. Press the Stop knob to stop recording.
3. Save the EDL data to a USB as follows:
a)
Insert your USB drive into the USB Port on
the switcher. You must wait 5 seconds for the
switcher to recognise the USB drive.
b) Press the Save knob.
c) Press the Confrm knob to store the LiveEDL
file to the USB drive.
Carbonite Black Setup Manual (v14.0) — Live Edit Decision Lists • 43