Rose electronics Orion XC OXS-XC008-FS Скачать руководство пользователя страница 10

Страница: 10 / 132

Orion XC Installation and Operation Manual

About This Manual

This manual covers the installation, configuration, and operation of the Orion XC System. The System consists

of three components; the Orion XC switch, the CPU device(s), and the CON device(s). This manual only

covers the Orion XC switch. The Installation section explains how the three components are interconnected to

form a seamless switching network. The Operations section describes how to operate the system and the

features available to make switching and maintenance simple and easy.

Features



Comes in several models, each with different numbers of ports:

8-port

16-port

32-port

48-port

64-port

80-port



Ports can be all CATx, all Fiber, or with the two largest models, mixed CATx and Fiber



Extend KVM stations and computers up to 460 feet (140m) on either side of the matrix through CATx

cable, up to 3,280 feet (1 km ) using multi-mode fiber, or 32,808 feet (10 km) using single-mode fiber



Supports resolutions up to 1920 x 1200 @ 60Hz and all DVI Single-Link resolutions including

High-definition 1080p or 2K



Intuitive OSD for easy use and configuration at each user station



Each port on the Orion XC will automatically be configured as an input or output depending on the type

of device that is connected. If a CPU device is connected, the port becomes an input. If a CON device

is connected, the port becomes an output.



Switch video sources of the same resolution instantly with no delay or display blanking



Can handle mixed signals including:

DVI or VGA inputs

Transparent USB 2.0

USB HID

PS/2

Serial

Analog or Digital audio



Redundant, load sharing power supplies in all models except 8 port; redundant power option in the 8

port model



Rack-mountable – 8-port, 16-port, 32-port and 48-port models are 1U size; 64-port and 80-port models

are 2U size.



Five optional firmware bundles are available for extra functionality:

Extended Switching and Presets added to the Java Tool

Extended Switching and Presets added to the Java Tool and additional API

SNMP and Syslog for unit monitoring

Matrix Grid

Multi-Screen Control

Содержание Orion XC OXS-XC008-FS





































































































































Результаты поиска

Содержание Orion XC OXS-XC008-FS

Отзывы:

Похожие инструкции для Orion XC OXS-XC008-FS

Бренды по названию

Популярные бренды

Rose electronics Orion XC OXS-XC008-FS, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion XC OXS-XC008-FS

Отзывы:

Похожие инструкции для Orion XC OXS-XC008-FS

Бренды по названию

Популярные бренды