Rose electronics Orion XC OXS-XC008-FS Скачать руководство пользователя страница 102

Страница: 102 / 132

Orion XC Installation and Operation Manual

Factory Reset

Resetting the system to factory defaults is available through the OSD and the Java Tool.

When a factory reset is done, all current settings and all configurations stored in the matrix will be lost. This

also applies to the network parameters (DHCP will be reset to

) and the admin password.

If firmware updates have been performed, the Orion XC will be set to the defaults defined in the most recent

firmware applied.

Resetting Through the OSD

1. Select

Configuration > Factory Reset

in the main menu.

2. Confirm the selection with the

Okay

button.

The Orion XC will be reset to factory settings.

Resetting Through the Java Tool

1. Select

Matrix > Advanced Service > Factory Reset

in the menu bar.

2. Confirm the selection with the

Yes

button.

Power Down

A complete system shutdown or a partial shutdown of an I/O board can be performed through the OSD.

To shut down the system, proceed as follows.

1. From the main menu, select

Configuration > Shut down Matrix

2. Confirm the selection with the

Okay

button.

The matrix will be shut down.

To shut down an I/O Board, proceed as follows.

1. From the main menu,

Select Configuration > Shut down IO Board

2. Confirm the selection with the

Okay

button.

The I/O board will be shut down.

Содержание Orion XC OXS-XC008-FS





































































































































Результаты поиска

Содержание Orion XC OXS-XC008-FS

Отзывы:

Похожие инструкции для Orion XC OXS-XC008-FS

Бренды по названию

Популярные бренды

Rose electronics Orion XC OXS-XC008-FS, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion XC OXS-XC008-FS

Отзывы:

Похожие инструкции для Orion XC OXS-XC008-FS

Бренды по названию

Популярные бренды