4801-5164J
20 October 2021
29
RS-500 5K Walk-In Cooler Door Installation and Operation Manual
Section 3.7.2: Display Indicator Readings
In addition to the toggleable readings defined in Section 3.7.1, the Display Indicator sometimes shows other values that represent
the Smart Controller's status.
Software Version and Model Number
When the Smart Controller is powered on, the Display Indicator flashes the current software version and the model number for
approximately two seconds. This reading is then replaced by the Actual Position.
Actual Position
When displaying the Actual Position of the door (see Section 3.7.1) the Display Indicator will appear similar to the example shown
here. In this example, the door is at the Actual Position of 240 counts.
Unknown Position
On occasion, such as when returning from Jog Mode, the Smart Controller may be unaware of the door's Actual Position. When
this occurs, the Display Indicator shows a series of three horizontal bars. If the door is activated, it will proceed to the fully open
position at reduced speed. When the door reaches the home sensor, it will reset to the open limit position; the Display Indicator
will then show the Actual Position. This indicates the door has been reset and is ready for normal operation.
