4801-5164J
20 October 2021
24
RS-500 5K Walk-In Cooler Door Installation and Operation Manual
The Egress Track System allows the door to be opened manually from the inside in case of a power outage or other malfunction.
The "Emergency Exit" label will face you as you use the system.
1. Push against the back side of the door.
2. The tracks will break away. Continue pushing until you have enough clearance to exit.
In order for the door to seal properly after using the Egress Track System, the tracks must be reset as follows:
1. Push the panel and the tension pipes back into the track cavity.
2. While holding the panel in position, flip each track back into the operational position so the magnetic seal can engage.
3. Once the panel and the tracks have been reset, and the safety beam is therefore no longer obstructed, open and close the
door to ensure it functions properly.
Section 3.2: Egress Track System
Front
Back
