4801-5164J
20 October 2021
13
RS-500 5K Walk-In Cooler Door Installation and Operation Manual
Section 2.4: Mount Door to Clear Opening
1. Ensure the door assembly is lying face-down with the bottoms of the tracks perpendicular to the bottom of the clear opening.
2. Slowly lift the head unit until it is upright.
3. Walk the door backward, then slide the tracks until they contact the clear opening mounting structure.
4. Ensure the door assembly is square and level.
5. Ensure the mounting holes on the tracks and the back plate are aligned with the structural support members.
6. Secure the door assembly by installing the provided hex-drive rivets through the prepunched holes at the corners. For
all other prepunched holes, if mounting the assembly to metal, use the provided self-tapping screws or stitch screws. If
mounting the assembly to wood, use wood screws (not provided).
7. Ensure the bottoms of the tracks are square, then secure them to the floor using the provided concrete anchors.
NOTICE:
If the tracks are not square, the safety beam will not function properly, triggering error code "PS" (see Section 5.4).
8. Reinstall the head unit cover by inserting the two downward-facing tabs on the back of the cover into the two slots at the top
of the door frame. Leave the cover open.
