manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 189

 

13—Operating the Hard Disk Recorder

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

189

 

Placing a Marker

 

You can place a marker when the project is stopped or when it’s playing.

 

To Place a Marker

 

1.

Press TAP to place a marker at the timeline’s current location. The 
marker appears as a downward-pointing arrow above the home 
screen’s playlist in the location at which you hit TAP.

 

How Marker Numbers are Assigned

 

When a marker is placed, it’s assigned a number—this number serves as the marker’s 
name unless you manually edit it (Page 190). A marker’s number reflects its position in 
a chronological list of all of the markers in a project. If new markers are placed in the 
project, any markers that follow them are renumbered to reflect their new, later 
position in the marker list.

 

Moving the Timeline to a Marker

 

Using the Locate to Marker Window

 

You can jump to any marker’s position in the project at any time.

1.

Press MARKER—the Locate to Marker window appears.

2.

Turn the TIME/VALUE dial to place an arrow to the left of 
the desired marker—ENTER/YES turns on.

3.

Press ENTER/YES to jump to the marker’s location.

4.

Press EXIT/NO to close the window.

 

Using PREVIOUS and NEXT

 

You can jump from one marker to the next, or back using the 
PREVIOUS and NEXT buttons:

•

 

Hold down SHIFT and press NEXT

 

—to jump to the next marker in 

the project after the timeline’s current position.

•

 

Hold down SHIFT and press PREVIOUS

 

—to jump to the last marker 

in the project before the timeline’s current position.

There must be at least 0.1 seconds of time between any two markers.

You can also clear a marker from the Clear Marker window, as described on

 

Page 190.

You can change the behavior of the PREVIOUS and NEXT buttons so you don’t have to 
hold SHIFT. As shipped from the factory, they’re set to move from phrase to phrase on 
the selected track (Page 239). To change the buttons’ behavior, switch the PREVIOUS/
NEXT Sw Utility menu parameter (Page 363) to MARKER.

We’ve placed three 
markers, as shown by 
the arrows above the 
playlist.

PREVIOUS

SHIFT

+

NEXT

SHIFT

+

VS2480OMUS.book 189 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды