manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 327

 

26—Automix

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

327

 

The AUTOMIX STATUS Area

 

In the AUTOMIX STATUS area, select each Automix 
track and turn the TIME/VALUE dial to set it as 
desired. The appearance of each Automix track’s box 
shows you its current status.

An Automix track can be set to:

•

 

Manual

 

—so the corresponding input, track, Aux master or FX return channel, 

MASTER fader or Direct bus doesn’t use Automix. Its parameters are set manually.

•

 

Write

 

—so that the Automix track records changes made to the corresponding 

input, track, Aux bus or FX return channel, MASTER fader or Direct bus.

•

 

Read

 

—so that the Automix track plays back its recorded Automix data.

 

The F3 (ERASE) Button

 

To erase all of the project’s Automix data at once, press F3 (ERASE).

 

Activating Automix Mode

 

1.

Stop project playback.

2.

Press AUTOMIX—it lights amber to show Automix mode is active.

3.

To turn Automix mode off, press AUTOMIX again—its light turns off.

 

The AUTOMIX STATUS Buttons

 

When Automix mode is active, each CH EDIT/SELECT/PHRASE SEQ STATUS/
AUTOMIX STATUS button can set the status of its corresponding Automix track. 

 

Using the AUTOMIX STATUS Buttons

 

1.

Press the FADER button for the group of channels containing the one that 
corresponds to the desired Automix track.

2.

In Automix isn’t already lit solid amber—press AUTOMIX.

3.

While holding down AUTOMIX, press the desired AUTOMIX STATUS button. 
Each press changes the Automix track’s status, as reflected by the button’s color.

You can also change the status of most Automix tracks using the AUTOMIX STATUS 
buttons, as described below.

For the remainder of this chapter, we’ll refer to these buttons as simply “AUTOMIX 
STATUS” buttons. 

You can change the status of the MASTER bus, Direct bus and effect patch Automix 
tracks only on the AUTOMIX screen.

 

If AUTOMIX STATUS is:

Its Automix track is set to:

 

amber

Manual mode

red

Write mode

green

Read mode

The color of each AUTOMIX STATUS button is mirrored in the AUTOMIX STATUS 
area of the AUTOMIX screen—changing an Automix track’s status in either place 
changes it in both.

The Automix track is set to:

Manual

Write

Read

AUTOMIX

VS2480OMUS.book 327 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды