manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 143

 

10—Using the Digital Mixer

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

143

 

Mute Mode

 

Mute mode lets you mute or un-mute multiple input, track and FX return channels 
quickly and easily. After muting the desired channels, you can leave Mute mode with 
the channels remaining muted. You can return to Mute mode at any time to un-mute 
the silenced channels, or you can turn off their CH EDIT MUTE switches.

 

Muting Channels in Mute Mode

 

1.

While holding down SHIFT, press IN 17-24/AUX MST•MUTE.
The channel strips’ SELECT buttons flash. When a channel strip’s 
SELECT button is flashing in Mute mode, its signal is not muted.

2.

Press the desired FADER button to select the set of channels 
containing the channel you wish to mute.

3.

Press the desired channel’s SELECT button—it lights solidly to show the channel is 
muted, and its signal silenced. You can mute as many channels as you wish.

4.

To un-mute a channel, press its SELECT button again. It flashes to show that the 
channel’s no longer muted.

5.

To exit Mute mode, hold down SHIFT and press IN 17-24/AUX MST•MUTE.

 

Solo Mode

 

In Solo mode, you can quickly isolate individual channels—temporarily silencing all 
other channels—so that you can hear them more clearly. After you’ve soloed the 
desired channels, you can exit Solo mode and turn to other tasks with the selected 
channels remaining soloed. You can return to Solo mode at any time to un-solo the 
channels or turn off their CH EDIT SOLO switches.

 

Soloing Channels in Solo Mode

 

1.

While holding down SHIFT, press IN 1-16•SOLO.
The channel strips’ SELECT buttons flash. When a channel strip’s 
SELECT button is flashing, its signal is not currently soloed.

2.

Press the desired FADER button to select the set of channels 
containing the channel you wish to solo.

3.

Press the desired channel’s SELECT button—it lights solidly to show the channel is 
now soloed, and all other channels are temporarily silenced. You can solo as many 
channels as you like.

4.

To un-solo a channel, press its SELECT button again. It flashes to show that the 
channel’s no longer soloed.

5.

To exit Solo mode, hold down SHIFT and press IN 1-16•SOLO.

Automix can record and play back the muting and un-muting of channels.

To un-mute all currently muted channels, hold down CLEAR and press IN 17-24/AUX 
MST•MUTE.

To un-solo all currently soloed channels, hold down CLEAR and press IN 1-16•SOLO.

SHIFT

+

IN 17-24

AUX MST

MUTE

SHIFT

+

IN 1-16

SOLO

VS2480OMUS.book 143 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды