manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 97

 

7—Project and Drive Operations

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

97

 

Recording Mode

 

The VS-2480 provides eight “recording modes” from which to choose. A project’s 
recording mode configures the VS-2480’s hard disk recorder at the desired balance 
between a project’s audio quality, how many tracks the project contains, and the 
amount of disk space its audio consumes.

 

Description of Each Recording Mode

Number of Available Playback Tracks in Each Recording Mode

 

The number of playback tracks in each mode depends on the selected sample rate:

*

Use the 44.1k sample rate when creating a CDR mode project since only 44.1k 
audio can be burned onto a CD. Tracks in CDR mode are linked as odd/even pairs.

 

Number of Available Simultaneous Recording Tracks in Each Recording Mode

 

•

All modes can record up to 16 tracks at once if the sampling rate is 48k or lower.

•

All modes can record up to 8 tracks at once if the sampling rate is 64k or higher.

Unless you have a reason to do otherwise, use the 24-track, 24-bit MTP recording mode. 
The 

 

VS-2480 Owner’s Manual

 

 assumes that your projects use this mode, except as noted.

 

Recording mode:

Description:

 

M24 (Mastering 24-bit)

Audio is recorded as linear 24-bit data.

MTP (Multi Track Pro)

This is the VS-2480’s default 24-bit recording mode.

CDR (CD-R Writing)

Audio is recorded as 16-bit linear data in a CD disk-image file 

format ready for burning to an audio CD (Page 340)—great 
for compiling mastering tracks for an album’s worth of songs.

M16 (Mastering 16-bit)

Audio is recorded as 16-bit linear data similar to that 

produced by a CD player or DAT recorder.

MT1 (Multi Track 1)

This recording mode offers twice the recording time of M16 

while preserving its sound quality.

MT2 (Multi Track 2)

This mode offers even more recording time than MT1.

LIV

Use the LIV mode when you’re doing live recording and can’t 
be sure how long you’ll need to keep recording. It’s also 
handy if you’re running out of space on your hard drive.

LV2

Use LV2 for recording speech, for reference recordings, or if 
you’re concerned about running out of disk space.

 

Recording mode:

Tracks up to 48k:

Tracks at 64k and higher:

 

M24

Tracks 1-16

Tracks 1-8

MTP

Tracks 1-24

Tracks 1-12

CDR

Tracks 1-16*

*

M16 

Tracks 1-16

Tracks 1-8

MT1

Tracks 1-24

Tracks 1-12

MT2

Tracks 1-24

Tracks 1-12

LIV

Tracks 1-24

Tracks 1-12

LV2

Tracks 1-24

Tracks 1-12

VS2480OMUS.book 97 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды