manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 322

 

25—Surround

 

322

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Certain parameter values change when you turn on Surround mode.

 

Positioning a Signal in the Surround Field

 

Each input, track and FX return channel has its own Surround controls that let you 
place its signal at the desired location within the three-dimensional Surround field. You 
can position a channel’s signal from its CH EDIT VIEW page, or from its dedicated CH 
EDIT SURROUND screen that presents a large graphic representation of the signal’s 
Surround position.

1.

Press the FADER button that selects the group of channels containing the one 
whose Surround position you want to set.

2.

Press the desired channel’s CH EDIT button.
At the bottom of the CH EDIT VIEW screen, you see that Surround parameters 
have replaced the Aux bus send controls for the Aux busses used by the selected 
Surround format.

These parameters are the same as those found on the channel’s CH EDIT 
SURROUND screen—they’re available here to provide a quick way to adjust a 
channel’s Surround position as you work with its other CH EDIT parameters. We’ll 
describe how the Surround parameters work in our discussion of the CH EDIT 
SURROUND screen.

3.

If “Surrnd” isn’t visible above F2, press PAGE until it is.

4.

Press F2 (Surrnd) to view the CH EDIT SURROUND screen.

 

Parameter type:

What Happens:

 

Input and track channel CH 
EDIT parameters

•

ChLink is turned off for any linked channels.

•

Surround placement controls replace the Aux bus send 

controls for any Aux busses used by the selected 
Surround format.

FX return channel CH EDIT 
parameters

•

The ASSIGN parameter is turned off for any Aux 

busses used by the selected Surround format.

•

Surround placement controls replace the Aux bus send 

controls for any Aux busses used by the selected 
Surround format.

MASTER EDIT parameters

•

The level controls of Aux busses used by the selected 

Surround format become Surround speaker master 
level controls.

•

If any Aux busses used by the selected Surround 
format are linked, they become unlinked.

Input and track channels

FX return channels

3+2+1 Surround position parameters

VS2480OMUS.book 322 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды