manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 390

 

Supplemental Information

 

390

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

CLOCK SOURCE

 

CLOCK SOURCE selects the master clock timing reference for the ADA-7000. This 
parameter interacts with the VS-2480’s MASTER CLOCK parameter (Page 132).

•

When the VS-2480’s MASTER CLOCK parameter’s value is the R-BUS jack to 
which the ADA-7000 is connected, the ADA-7000’s CLOCK SOURCE should be set 
to INTERNAL or WORD CLOCK.

•

When the VS-2480 MASTER CLOCK is set to INT, COAXIAL IN, OPTICAL IN, 
WORD CLOCK or EXT TIME CODE, the ADA-7000’s CLOCK SOURCE should be 
set to R-BUS. However, if a separate word clock generator is supplying word clock 
directly to the ADA-7000, set the ADA-7000’s CLOCK SOURCE to WORD CLOCK.

The following table explains the CLOCK SOURCE values and tells you how to set the 
VS-2480’s MASTER CLOCK parameter with each ADA-7000 CLOCK SOURCE value.

 

SAMPLING FREQ

 

SAMPLING FREQ provides a readout of the sample rate at which the ADA-7000 is 
operating and capturing audio through its input jacks. When the ADA-7000’s CLOCK 
SOURCE parameter is set to INTERNAL, SAMPLING FREQ automatically switches to 
the current project’s sample rate, unless the project uses the 88.2k or 64k sample 
rates—the ADA-7000 doesn’t support the use of these two sample rates.

 

AE-7000 Settings

 

Turn down the volume for all connected equipment before changing the CLOCK 
SOURCE value to avoid damage to your equipment.

 

If the ADA-7000
CLOCK SOURCE is:

This means that
the ADA-7000:

Set the VS-2480’s
MASTER CLOCK to:

 

INTERNAL

uses its own master clock and sample
rate (see “SAMPLING FREQ” below).

the ADA-7000’s
R-BUS jack.

WORD CLOCK

derives its clocking from the word
clock device connected to its rear-panel 
WORD CLOCK jack.

the ADA-7000’s
R-BUS jack.

R-BUS

derives master clock from the VS-2480.

a clock source other 

than the ADA-7000’s 
R-BUS jack.

When the ADA-7000’s CLOCK SOURCE is set to any value other than INTERNAL, it 
derives its sample rate from the selected master clock source.

VS2480OMUS.book 390 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды