manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 381

 

29—Expanding the VS-2480

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

381

 

Connecting a CD-R/RW Drive to the VS-2480

 

1.

Double-check to make sure that both the CD-R/RW 
drive and the VS-2480 are turned off. If there are any 
other SCSI devices connected to the VS-2480, make 
sure they’re powered down as well.

2.

Connect a SCSI cable from one of the CD-R/RW’s 
SCSI jacks to the VS-2480’s SCSI jack (Page 48), as 
shown here.

3.

If the CD-R/RW is the only SCSI device connected to 
the VS-2480, make sure its terminator switch is turned 
on. If the drive has no terminator switch, plug a 
terminator plug into its second SCSI jack.
The factory setting for the VS-2480 is SCSI ID 7. The 
factory SCSI ID for a Roland VS-CDRII and CD-RACK 
is ID 4.

4.

If you’ve changed either device’s ID, make sure that 
the CD-R/RW’s SCSI ID number is set to a different 
number than the VS-2480.

5.

Turn on the power to the CD-R/RW drive.

6.

Turn on the VS-2480’s power.

7.

Turn on the remainder of your equipment.

 

Connecting a Zip Drive to the VS-2480

 

1.

Double-check to make sure that both the Zip drive and 
the VS-2480 are turned off. If there are any other SCSI 
devices connected to the VS-2480, make sure they’re 
powered down as well.

2.

Connect a SCSI cable from one of the Zip drive’s SCSI 
jacks to the VS-2480’s SCSI jack (Page 48), as shown.

3.

If the Zip drive is the only SCSI device connected to 
the VS-2480, make sure its terminator switch is on.

4.

Make sure that the Zip drive’s SCSI ID number is set 
to a different ID number than the VS-2480. The factory 
setting for the VS-2480 is SCSI ID 7.

5.

Turn on the power to the Zip drive.

6.

Turn on the VS-2480’s power.

7.

Turn on the remainder of your equipment.

Before connecting a CD-R/RW drive to the VS-2480, turn off power to all of your 
devices—including your speakers—to prevent damage to your equipment.

You should always power up its SCSI devices before turning on the VS-2480.

Before connecting a Zip drive to the VS-2480, turn off power to all of your devices—
including your speakers—to prevent damage to your equipment.

You should always power up its SCSI devices before 
turning on the VS-2480.

VGA OUT

SCSI

KEYBOARD

SMPTE

IN

MOUSE

MIDI

IN

OUT / THRU

PS / 2

/

VGA OUT

SCSI

KEYBOARD

SMPTE

IN

MOUSE

MIDI

IN

OUT / THRU

PS / 2

/

VS2480OMUS.book 381 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды