manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 247

 

18—Editing Tracks

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

247

 

Editing with the TRACK EDIT Buttons

 

This section describes how to perform seven of the 
most common track phrase and region edits using 
the TRACK EDIT buttons, the cursor buttons, SHIFT 
and the TIME/VALUE dial.

 

Placing Edit Points Using the IN, OUT, FROM and TO Buttons

 

To set edit points for the first time in a project using the VS-2480’s buttons:

1.

Position the timeline at the desired location.

2.

Press the IN, OUT, FROM or TO button.

3.

To clear an edit point, hold down CLEAR and press the desired IN, OUT, FROM or 
TO button.

Once you’ve set a project’s IN, OUT, FROM and TO points, their buttons can be 
configured so that pressing an edit point’s button:

•

moves the timeline to its position.

•

resets the edit point to the current position of the timeline.

 

Configuring the Behavior of the IN, OUT, FROM and TO Buttons

 

1.

Press UTILITY.

2.

If “GLOBAL” doesn’t appear over F2, press PAGE until it does.

3.

Press F2 (GLOBAL).

4.

The EDIT POINT Sw TYPE parameter sets the behavior of the IN, OUT, FROM and 
TO buttons for resetting your IN, OUT, FROM or TO edit points. You can choose:
•

 

Same as LOCATOR

 

—so that pressing an edit point’s button moves the timeline 

to the edit point’s location in the project.

•

 

OVERWRITE

 

—so that pressing an edit point’s button resets the edit point to the 

current position of the timeline.

5.

Press F6 (EXIT) to confirm your changes and to leave the GLOBAL Param1 screen.

 

Selecting a Track Using the VS-2480’s Buttons

 

1.

Press 

 

 

 or 

 

 

 to move the cursor to the desired track.

 

Selecting Phrases and Regions with the VS-2480’s Buttons

 

To select a phrase:

 

1.

Position the timeline so that it’s touching the desired phrase.

2.

Press 

 

 

 or 

 

 

 to cursor to the track on which the phrase resides.

3.

Press ENTER/YES to select the phrase.

4.

To unselect the phrase, press ENTER/YES again.

 

To select a region:

 

1.

Set the boundaries of the desired region by placing the IN point at its beginning 
and the OUT point at its end.

2.

Press 

 

 

 or 

 

 

 to cursor to the track on which the region resides.

3.

Press ENTER/YES to select the region. To unselect it, press ENTER/YES again.

If EDIT POINT Sw TYPE is set to OVERWRITE, you can still move the timeline to an 
edit point—hold down SHIFT and press the desired IN, OUT, FROM or TO button. 

TRACK  EDIT

COPY

MOVE

INSERT

CUT

ERASE

COMP / EXP.

IMPORT

TO

TO

OUT

OUT

IN

IN

FROM

FROM

COPY

MOVE

TRIM IN

TRIM OUT

DELETE

SPLIT

NEW

REGION

PHRASE

AUTOMIX

GRADATION

VS2480OMUS.book 247 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды