manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 286

 

21—Using the Phrase Pads

 

286

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Bouncing Phrase Sequence Tracks

 

1.

If you’re not in Phrase Sequence mode, hold down SHIFT and press PHRASE PAD 
PLAY•PHRASE SEQ so that it lights solid red to indicate that the phrase sequencer 
is ready to play back its data.

2.

Make sure that the PHRASE SEQ STATUS button for any sequence track you want 
to bounce is green.

3.

If you want to change any CH EDIT settings for a sequence track—including 
adding effects or linking the sequence track to its odd/even partner—hold down 
SHIFT, press its CH EDIT button and make the desired changes. If you’re adding 
effects, make sure to route the FX return channels to your destination hard disk 
recorder tracks, and bring up the necessary FX return channel faders.

4.

If you want to change the destination V-Track for any of your destination hard disk 
recorder tracks—or if you want to link the track to its odd/even partner—hold 
down SHIFT, press the desired track channel’s CH EDIT button and make the 
desired changes.

5.

Route the source sequence tracks to the destination hard disk recorder tracks as 
you would for a normal bounce—the sequence tracks look just like standard tracks 
on the Quick Routing screen and in the EZ ROUTING VIEW screen.

6.

Arm each destination track for recording by holding down REC and pressing the 
track’s TRACK STATUS button.

7.

Hold down REC and press PLAY to perform the bounce.

8.

When the bounce is complete, hold down SHIFT and press PHRASE PAD 
PLAY•PHRASE SEQ to leave Phrase Sequence mode.

9.

Hold down STOP, press TRACK STATUS for your destination tracks and listen to 
the bounce.

VS2480OMUS.book 286 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды