manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 208

 

15—The Aux and Direct Busses

 

208

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

3.

Press ENTER/YES—the following dialog box appears.

4.

Select Pre or Pst for the POSITION parameter, as desired.

5.

Turn BUS LINK on or off as desired.

 

Direct Busses

 

Here’s what the eight Direct busses can do:

•

They can carry a single signal.

•

Each input, track and FX return channel has its own Direct bus assignment switch 
that lets you send its signal to any Direct bus.

•

You can send channel signals to a Direct bus pre- or post-fader.

•

Each Direct bus has a final level control.

 

When Would You Use a Direct Bus?

 

Wherever you might use an Aux bus to carry a single signal somewhere, you can just as 
easily use a Direct bus—this’ll save your Aux busses for other tasks. You can route a 
Direct bus to an internal effect. You can also route it to an output jack (Chapter 22) on its 
way to an external device such as an external digital recorder, effect processor or 
computer. You can send the VS-2480’s metronome output as a click track to a drummer’s 
headphone amp using a Direct bus.

 

Sending Tracks to Outputs

 

You can route track channels directly to outputs via the track direct outs (Page 289). 
However, when the track direct outs are active, Aux and Direct bus connections to 
outputs are de-activated. If you need to use these busses to send signals to outputs, 
send your tracks to the desired outputs using Direct busses instead of track direct outs. 

 

External Insert-Like Effects

 

While you can’t directly insert an external effect into an input, track or FX return 
channel, you can use a Direct bus to accomplish much the same result:

1.

Configure a Direct bus so that it accepts the channel’s signal post-fader (Page 209).

2.

Route the Direct bus to a digital output—see Chapter 22 for details.

3.

Connect the input of the external processor—or a computer with an effect plug-
in—to the digital output to which you’ve routed the Direct out.

4.

Assign the desired input, track or FX return channel to the Direct bus (Page 156).

5.

Turn off the channel’s CH EDIT MIX parameter to remove it from the main mix.

6.

Return the external processor’s—or computer’s—output to one of the VS-2480’s 
digital inputs. (See Chapter 9.)

7.

Select the digital input as the VS-2480’s master clock (Page 133).

8.

Activate the digital input if necessary and route it to an input channel (Chapter 9).

9.

Send the input channel’s signal into the MASTER mix or to a track (Chapter 12).

When Aux busses are linked, their controls on the CH EDIT screen change—see 
Page 152 for details.

VS2480OMUS.book 208 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды