manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 113

 

7—Project and Drive Operations

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

113

 

What Can Be Done About a Fragmented Hard Drive?

 

You can de-fragment—or “defrag”—your hard drive using the same three steps we 
listed in “How Can I Prevent Fragmentation?”

If you have trouble backing up a project, it may be because it’s just too fragmented. 
Perform the following actions, in order:

1.

Optimize the project (Page 100).

2.

After optimization, copy the project to another drive, preferably one that’s less 
crowded with project data (Page 101).

3.

Back up the copy and perform the steps in “How Can I Prevent Fragmentation?” on 
the previous page.

 

Format Drive

 

When you format a hard drive, you erase all of the information currently on it, and 
prepare it for use by the VS-2480. Formatting completely wipes clean all of the hard 
drive’s partitions. You’d format a hard drive:

•

after backing up all of its projects during your monthly hard drive maintenance, as 
described in “How Can I Prevent Fragmentation?” on Page 112.

•

when you’re de-fragging a hard drive after backing up all of the projects on it.

•

when you’ve purchased and installed a new internal hard drive, or one that’s been 
used by another device.

•

when you’re preparing a Zip disk for the storage of exported project data.

 

What Gets Formatted

 

When you format a drive, all of its contents are erased. If the drive has multiple 
partitions—as your internal hard disk does—they’re all wiped clean of data.

 

About Partition Sizes

 

When you format a hard drive, you’re asked to decide the size of its drives/partitions. 
The VS-2480 offers you four choices:

•

500MB

•

1GB

•

2GB

•

10GB

We recommend you select a 10GB partition size when you format a hard drive for use 
with the VS-2480—a 10GB partition provides plenty of room for the VS-2480’s 24-track 
projects. The other sizes are provided mainly for their familiarity to users of earlier
V-Studios.

If you have trouble backing up the copied project, try lowering the CD speed.

When a hard drive is formatted for use with the VS-2480, it can’t be used by another 
device, nor can another device’s hard drive be used by the VS-2480 without being
re-formatted.

To learn about partitions, see “How a VS-2480 Hard Drive Organizes Data” on Page 86.

“MB” is short for megabytes, one thousand bytes.

VS2480OMUS.book 113 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды