manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 190

 

13—Operating the Hard Disk Recorder

 

190

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Clearing Markers

 

Clearing a Marker Using PREVIOUS and NEXT

 

1.

Move to the marker you want to clear using PREVIOUS or NEXT (see Page 189).

2.

Hold down CLEAR and press TAP.

 

Clearing a Marker in the Clear Marker Window

 

1.

Press MARKER—the Locate to Marker window appears.

2.

Turn the TIME/VALUE dial to place an arrow to the left of 
the desired marker.

3.

Press CLEAR—the Clear Marker window appears.

4.

Turn the TIME/VALUE dial to select another marker if you 
want to.

5.

Press ENTER/YES to clear the selected marker.

6.

Press EXIT/NO to leave the Clear Marker window.

7.

Press EXIT/NO to close the Locate to Marker window.

 

Clearing All Markers at Once

 

1.

Hold down SHIFT and CLEAR and press TAP. The VS-2480 asks if you’re sure you 
want to delete all of the project’s markers.

2.

Press ENTER/YES to clear all markers from the project, or EXIT/NO to cancel the 
operation.

 

Editing Markers

 

The UTILITY menu’s Marker screen provides tools for naming, clearing, resetting or 
jumping to any marker.

1.

Hold down SHIFT and press MARKER.

2.

Press 

 

 

 or 

 

 

 or turn the TIME/VALUE dial to select the marker you want to edit. 

You can:
•

Press F1 (NAME) to rename (Page 73) the selected marker.

•

Press F2 (CLEAR) to delete the selected marker.

•

Press F3 (GetNow) to reset the marker to the timeline’s current position.

•

Press F4 (GO TO) to move the timeline to the selected marker’s position.

3.

Press F6 (EXIT) when you’re done to confirm your changes.

In addition to the two methods listed here, you can clear a marker in the UTILITY 
menu’s Marker screen, described in “Editing Markers” below.

When you clear all markers, every marker in the project is deleted, including all CD 
track markers.

VS2480OMUS.book 190 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды