Roland SP-404MK, Справочное руководство

Страница: 87 / 204

Use the [CTRL 2] knob to set ROUTING to “Mix.”
4
Press the [EXIT] button.
5
Press pads [1]‒[16] that are blinking red.
The empty pads to which samples havenʼt been assigned blink red.
When you press an empty pad, the pad changes to blinking purple, and a message “Press Pad to START”
is shown.
6
Press pads [1]‒[16] while holding down the [HOLD] button to select the pattern chain to play back.
The PATTERN CHAIN screen appears.
7
Press the [SUB PAD] button.
Sampling begins when the selected pattern chain starts playing back.
If you decide to cancel sampling, press the [EXIT] button.
8
To exit sampling, press the [REC] button.
The sample is saved to the pad.
9