Roland SP-404MK Скачать руководство пользователя страница 198

Страница: 198 / 204

Appendix

Error Messages

Error
messages

Explanation

Action

Battery Low!

The batteries are nearly depleted.

Replace the batteries, or switch to an AC adaptor.

→ “

About the Power Supply

”

Unsupported
FILE

The ﬁle type is not supported on this unit.

Check the ﬁle extension, format and folder directory.

→ “

Importing/Exporting (Using the SD Card)

”

No SD
CARD!

No SD card is inserted. Also, the SD card
might not be fully inserted.

Turn oﬀ the power, and make sure that the SD card
is fully inserted before you turn the power back on.

Unsupported
SD Card!

An unsupported type of SD card has
been inserted.

Please format the SD card.

→ “

Formatting an SD Card

”

SD CARD
Protected!

The write-protect feature has been
enabled on the SD card.

Unlock the lock switch on the left side of the SD
card.

SD CARD
Full!

The SD card has run out of free space.

Delete any unneeded data on the card.

Internal
Storage Full!

There is not enough storage capacity left
on this unit.

Delete any unneeded data on the unit.

Storage
Error!

A problem has occurred with the internal
storage.

Try performing a factory reset.

→ “

Restoring the Factory Settings (FACTORY

RESET)

”

Protected!

The function canʼt be executed because
bank protect is enabled.

Use a bank for which bank protect is disabled, or
disable bank protect on the currently selected bank.

→ “

Selecting a Sample Bank

Protecting a Sample (PROTECT)

Max Length
Pattern

The maximum number of notes that can
be recorded to the pattern sequencer
has been exceeded.

Reduce the number of notes in the pattern, or
shorten and split the pattern to record.

→ “

Creating a New Pattern

”

Содержание SP-404MK













































































































































































































Результаты поиска

Содержание SP-404MK

Отзывы:

Бренды по названию

Популярные бренды

Roland SP-404MK, Справочное руководство

Результаты поиска

Содержание SP-404MK

Отзывы:

Бренды по названию

Популярные бренды