Roland SP-404MK, Справочное руководство

Страница: 196 / 204

[BUS FX] button MUTE BUS Temporarily turns off the audio sent to the bus (the sample playback
sound or the sound inputted to the INPUT jack), and outputs only the
sound of the effect.
→“ Temporarily Output Only the Effect Sound (MUTE BUS) ”
[HOLD] button PAUSE Pauses the sample thatʼs currently playing back.
→“ Pausing the Sound of a Sample (PAUSE) ”
[EXT SOURCE]
button INPUT SETTING Displays the input setting screen.
→“ Configuring the Sampling Settings (RECORD SETTING) ”
[SUB PAD] button PROJECT Displays the SELECT PROJECT screen.
→“ Selecting a Project ”
Shortcuts that use the [REMAIN] button
While holding down the
[SHIFT] button Function (explanation)
Pads [1]‒[16] Sets which sample playback audio is sent to which bus (meaning which effects
are used) for each sample.
→“ Deciding on Effects to Use for Each Sample ”
Bank [A/F]‒[E/J] buttons Sets the bus send destination for all samples in a bank.
[MFX] button Makes the effect edit screen keep displaying.
→“ Editing the Effects ”
[BUS FX] button Exchanges (swaps) the effects of BUS 1 and BUS 2.
Shortcuts that use the [VALUE] knob
While holding down the [VALUE] knob Function (explanation)
Effect buttons ([DRIVE]‒[MFX]
button) Applies effects only while you hold down the effect buttons (EFFECT
GRAB).
→“ Turning Effects On/Off at the Desired Timing ”
Pads [1]‒[16] Selects a sample (no sound is produced).
Shortcuts that use the [DEL] button