Roland SP-404MK, Справочное руководство

Страница: 129 / 204

Configuring the Various Settings (UTILITY)
>
Configuring the Effect Settings (EFX SET)
Assigning the Desired Effect to an Effect Button (DIRECT FX)
You can assign the effects you like to the effect buttons on the top panel.
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
1
Use the [VALUE] knob to select “EFX SET,” and press the [VALUE] knob.
The effect setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the
[SHIFT] button.
2
Turn the [CTRL 3] knob to select “DIRECT.” 3
Use the [VALUE] knob to select the effect button to which the effect is to be assigned.
Effect button to assign Parameter
[DRIVE] button Direct FX1
[RESONATOR] button Direct FX2
[DELAY] button Direct FX3
[ISOLATOR] button Direct FX4
[DJFX LOOPER] button Direct FX5
You can also press an effect button to change its assigned effect.
4
Press the [VALUE] knob.
The value display is highlighted, and you can now change the effects.
5
Use the [VALUE] knob to select the effect, and press the [VALUE] knob.
The effect is assigned to the effect button you selected. After this, you can use the effect buttons on the
top panel to switch the assigned effects on/off.
6
To finish making settings, press the [EXIT] button.
7