Roland SP-404MK, Справочное руководство

Страница: 79 / 204

Combining Samples to Create a Pattern (PATTERN SEQUENCER)
Creating a New Pattern
Press the [PATTERN SELECT] button.
1
Press the [REC] button.
Empty pads in which no patterns have been recorded blink red.
The metronome sounds when the “Metronome:PTN” parameter is “ON” (the SYSTEM parameter “ CLICK ”).
Press pad [9] while holding down the [SHIFT] button to turn the metronome sound on/off.
2
Press pads [1]‒[16] that are blinking red to select the record destination pattern.
The unit enters pattern record standby mode, and the record setting screen appears.
3
Configure the parameters for the pattern.
Controller Parameter Value Explanation
[CTRL 1]
knob BPM 40‒200 Sets the patternʼs tempo.
[CTRL 2]
knob LENGTH 1, 2, 4, 8, 16, 32,
64 (measures) Sets the length of the pattern.
[CTRL 3]
knob STRENGTH 0‒100 (%) Sets the strength of quantization used for
adjusting the note timing, as set in the QTZ
parameter. When you set this to 100%, the
notes are adjusted exactly according to the
timing set in the QTZ parameter.
SHFL RATE -50‒+50 You can set how much to slide the timing of
the upbeats (the strength of the shuffle feel).
A setting of “0” results in no shuffle.
Settings in the range of +10‒+16 generally
give a pleasant shuffle feel.
This is enabled when the QTZ parameter is set
4