Roland SP-404MK, Справочное руководство

Страница: 60 / 204

Editing a Sample (SAMPLE EDIT)
Setting the Playback and Loop Regions (START/END)
You can prevent unnecessary parts of a sample from playing, such as silence or noise at the beginning or at the end.
This shows you how to set the start point (where a sample begins playing back) and the end point (where a sample
stops playing back). You can also use the same operations to set the loop point (the starting point for loop playback).
Press the [START/END] button.
The marker setting screen appears.
1
Press pads [1]‒[16] to select the sample you wan to edit.
2
Use the [CTRL 1]‒[CTRL 3] knobs to adjust the start and end points.
Controller Operation
[CTRL 1] knob Moves the start point.
[CTRL 2] knob
(when the loop is on)
Moves the loop point.
[CTRL 3] knob Moves the end point.
[SHIFT]
[CTRL] knob (turn) Zooms the area around each point in/out.
[VALUE] knob (turn) Zooms the area in/out around each point you just manipulated.
[SHIFT]
[VALUE] knob (turn) You can use a numerical value to set the position of each point.
Use the [VALUE] knob to select the point to set, and press pads [1]‒[10] to
input the position (press pad [10] to input a “0”).
To confirm the inputted position, press the [VALUE] knob.
[DEL] button Initializes the start and end point positions.
When a confirmation message appears, use the [VALUE] knob to select
“OK,” and press the [VALUE] knob.
[REMAIN] button On: Prevents the start point from being moved beyond the loop point or
the end point.
Off: When the start point moves beyond the loop point or the end point,
this moves the loop point or the end point as well.
[MARK] button When this button is pressed while a sample is playing back, this sets the
start point and end point in order.
The loop point is set to the same position as the start point.
[ROLL] button While this button is pressed, you can preview the sound several seconds
before the end point.
3
Once youʼve confirmed the start/end point, press the [EXIT] button.
4