Roland SP-404MK, Справочное руководство

Страница: 63 / 204

Automatically adding markers based on conditions (AUTO
MARK function)
You can use the AUTO MARK function to automatically add markers based on certain conditions you specify.
Hold down the [SHIFT] button and press the [START/END] button.
The marker setting screen appears. 2
Press the pad [1].
The sample plays back.
3
Press the pads [2]‒[16] that are blinking blue, at the timing where you want to add a marker.
This adds the marker to the sample. You can press pads [1]‒[16] to preview the audio at the
corresponding marker.
4
Press pads [1]‒[16] to select the sample to which you want to add markers.
1
Hold down the [SHIFT] button and press the [START/END] button.
The marker setting screen appears.
2
Press the [VALUE] knob.
A menu appears.
3
Use the [VALUE] knob to select “AUTO MARK,” and press the [VALUE] knob.
The AUTO MARK setting screen appears.
4
Use the [VALUE] knob or [CTRL 2] knob to select a parameter.
Parameter Value Explanation
TIME
DIVISION 2‒16 Adds markers by dividing up the sample equally.
LEVEL 1‒10 Adds a marker at the location in the sample where the levels exceed a
certain value.
TRANSIENT HARD,
MID, Adds a marker at the location in the sample where there is a large
change in volume, such as when a sound with sharp attack plays.
5