Roland SP-404MK, Справочное руководство

Страница: 69 / 204

Editing a Sample (SAMPLE EDIT)
Changing the Pitch or Playback Speed of a Sample (PITCH/SPEED)
Hereʼs how to change the pitch (key) or playback speed of a sample. You can independently edit the pitch and playback
speed, or make a sampleʼs length match that of the tempo.
Controller Parameter Value Explanation
[CTRL 1] knob SPEED 50‒150 (%) Sets the playback speed.
Use the [CTRL 1] knob while holding down the [SHIFT]
button to set more precise values.
This can only be set when BPM SYNC is off.
[CTRL 2] knob PITCH -12‒+12 Sets the playback pitch.
This can only be set when VINYL MODE is off.
[SHIFT]
[CTRL 2] knob FINE -1.00‒+1.00
(CENT) Lets you set a more precise value for the playback pitch.
[CTRL 3] knob VOLUME 0‒127 Sets the sample volume.
[SHIFT]
[CTRL 3] knob PAN MONO (Left),
L:50‒R:50,
MONO
(Right) Sets the stereo position (pan) of the sample.
Turn the [VALUE]
knob BPM SET AUTO, MANU Sets the sample tempo. When this is set to AUTO, the
tempo detected in AUTO mode is set. When this is set to
MANU, you can manually set the tempo.
For details, refer to “ Setting the Tempo Data in a Sample .”
Hold down [SHIFT]
turn
[VALUE] knob VINYL
MODE No, Yes Turns VINYL mode on/off. When this is on, the playback
speed and pitch can be changed at the same time, like an
analog record.
Press the [PITCH/SPEED] button.
The pitch/speed setting screen appears.
1
Press pads [1]‒[16] to select the sample you want to edit.
2
Use the [CTRL 1]‒[CTRL 3] knobs to edit the parameters.
3