Manual
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
Start-up
B0063191 / 1.3
94
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
7.10 Data backup
For better prevention off loss of data, a data backup procedure is available for the system
configuration and the parameter sets.
The backup is made via the upper USB interface on the front panel. The secured data can then for
example be transferred to an exchange-substituted unit after a unit failure. The data backup is
accomplished with the RPP7 software available from ROLAND ELECTRONIC.
The data backup procedure can be selected in the menu configuration. The following menu is
displayed during the data backup.
Fig. 90: Backup of data via USB interface
For backup of data, the
upper
USB slot on the front panel must be used.
Fig. 91: Display at active connection to PC.
For further information see chapter 10.4.
Parameter backup
Parameter backup
mode active
Connect upper USB
Parameter backup
Parameter backup
mode active