Manual
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
B0063191 / 1.3
Safety advice
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
7
1
Safety advice
1.1
Safety instructions and warnings for user
This manual contains all information required for the correct operation of the Roland equipment.
It has been written for technically qualified personnel.
Unauthorized tampering with the unit, especially ignoring the warnings in this manual can cause
malfunction and damage to the unit. Only authorized personnel should be allowed to make
changes to the unit and perform cable connections especially the power supply.
Should it be necessary, e.g. in case of service or repair, to make measurements within the unit,
then all customary accidents prevention procedures should be observed. Only professional
electrical tools should be used.
Note
The factory pre-settings – especially the upper / lower limit values – have
been chosen such that an optimal machine protection is ensured.
Diverging settings can impair the machine protection.
Safety instructions for handling of laser sensors!!
Caution!
Laser radiation!
Do not stare into the beam!
Do not stare into the reflected beam.
Max. power:
1 mW
Impuls duration:
max. 6.4 ms
Wavelength:
658 nm
Medium:
Semi conductor laser
Laser class II (EN 60825-1)
1.2
Declaration of icons
Warning – Laser radiation!
Risk to the eyes by laser radiation.
Attention - Damage of construction units!
Reference to a potential imminent situation, which can result in damage to the
product or environs.
Note
Useful reference to an application or deepening information.
