278
Effects List
26: HEXA-CHORUS
Uses a six-phase chorus (six layers of chorused sound) to give
richness and spatial spread to the sound.
fig.MFX-26
27: TREMOLO CHORUS
This is a chorus effect with added Tremolo (cyclic modulation of
volume).
fig.MFX-27
28: SPACE-D
This is a multiple chorus that applies two-phase modulation in
stereo. It gives no impression of modulation, but produces a
transparent chorus effect.
fig.MFX-28
29: 3D CHORUS
This applies a 3D effect to the chorus sound. The chorus sound will
be positioned 90 degrees left and 90 degrees right.
fig.MFX-29
Parameter
Value
Description
Pre Delay
0.0–100.0 ms
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Rate #
0.05–10.00 Hz, note
Frequency of modulation
Depth
0–127
Depth of modulation
Pre Delay
Deviation
0–20
Adjusts the differences in Pre
Delay between each chorus
sound.
Depth
Deviation
-20– +20
Adjusts the difference in modu-
lation depth between each cho-
rus sound.
Pan Deviation
0–20
Adjusts the difference in stereo
location between each chorus
sound.
0:
All chorus sounds will be in
the center.
20:
Each chorus sound will be
spaced at 60 degree intervals
relative to the center.
Balance #
D100:0W–D0:100W
Volume balance between the di-
rect sound (D) and the chorus
sound (W)
Level
0–127
Output Level
Parameter
Value
Description
Pre Delay
0.0–100.0 ms
Adjusts the delay time from
the direct sound until the cho-
rus sound is heard.
Chorus Rate #
0.05–10.00 Hz, note
Modulation frequency of the
chorus effect
Chorus Depth
0–127
Modulation depth of the cho-
rus effect
Tremolo Rate #
0.05–10.00 Hz, note
Modulation frequency of the
tremolo effect
Tremolo
Separation
0–127
Spread of the tremolo effect
Tremolo Phase
0–180 deg
Spread of the tremolo effect
Balance #
D100:0W–D0:100W
Volume balance between the
direct sound (D) and the trem-
olo chorus sound (W)
Level
0–127
Output Level
Balance W
Balance W
L in
R in
L out
R out
Hexa Chorus
Balance D
Balance D
Tremolo Chorus
L in
R in
L out
R out
Balance D
Balance D
Balance W
Balance W
Parameter
Value
Description
Pre Delay
0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
Rate #
0.05–10.00 Hz, note
Frequency of modulation
Depth
0–127
Depth of modulation
Phase
0–180 deg
Spatial spread of the sound
Low Gain
-15– +15 dB
Gain of the low range
High Gain
-15– +15 dB
Gain of the high range
Balance #
D100:0W–D0:100W
Volume balance between
the direct sound (D) and the
chorus sound (W)
Level
0–127
Output Level
Parameter
Value
Description
Filter Type
OFF, LPF, HPF
Type of filter
OFF:
no filter is used
LPF:
cuts the frequency
range above the Cutoff Freq
HPF:
cuts the frequency
range below the Cutoff Freq
Cutoff Freq
200–8000 Hz
Basic frequency of the filter
Pre Delay
0.0–100.0 ms
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Rate #
0.05–10.00 Hz, note
Frequency of modulation
Depth
0–127
Modulation depth of the chorus
effect
Phase
0–180 deg
Spatial spread of the sound
Output Mode
SPEAKER, PHONES
Adjusts the method that will be
used to hear the sound that is
output to the OUTPUT jacks.
The optimal 3D effect will be
achieved if you select
SPEAK-
ER
when using speakers, or
PHONES
when using head-
phones.
Low Gain
-15– +15 dB
Gain of the low range
High Gain
-15– +15 dB
Gain of the high range
Balance #
D100:0W–D0:100W
Volume balance between the
direct sound (D) and the chorus
sound (W)
Level
0–127
Output Level
L in
R in
Space D
Space D
L out
R out
2-Band
EQ
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
L
R
3D Chorus
2-Band
EQ
2-Band
EQ
R out
L out
Fantom-X678_r_e.book 278 ページ ２００５年５月１２日 木曜日 午後４時４０分
