manualshive.com logo in svg

Roland Fantom-X6, Руководство пользователя

Roland Fantom-X6 - высококачественная рабочая станция с мощными функциями. Владельческое руководство доступно для загрузки бесплатно на manualshive.com. Этот мануал поможет вам раскрыть все возможности инструмента и создать уникальные музыкальные произведения. Не упустите шанс скачать свой экземпляр сейчас!

Поделиться
Скачать
background image

 

253

Troubleshooting

 

• Is the data concentrated at the beginning of the beats in the 

sequence data?

Avoid overlapping data with the same timing by setting an 
offset of 1–2 clocks instead. Data may easily become 
concentrated at the beginning of the beats in the song data 
when, for example, the song data is input using Step Recording, 
or if the data is quantized after being input with a keyboard in 
real time. Because of this, large amounts of data are sent to the 
Fantom-X, and the processing for expressing sounds becomes 
bogged down.

• Is there a Program Change at the point where the song 

performance is sluggish?

Change the position of the Program Change. When Program 
Changes are inserted in songs, processing time for switching 
patches increases, which may then cause the performance to 
become sluggish.

• Is there a System Exclusive message at the point where the song 

performance is sluggish?

Move the location of the data. System Exclusive messages 
contain large amounts of data, thus placing a heavy burden on 
sequencers and sound modules. Try repositioning data and 
changing System Exclusive messages to Control Changes for 
any data for which Control Changes can be substituted.

• Is there an Aftertouch or other such large Control Change at the 

point where the song performance is sluggish?

Move the location of the data. If the data is no longer needed, 
delete the data. In some cases, when using a keyboard that 
features aftertouch to input data, you may end up inputting 
huge amounts of data before realizing this is happening. Such 
large amounts of data can place an excessive load on your 
sequencer and sound module.

 

You can use the Track Edit operation Data Thin (p. 190) to thin 
out unwanted messages.

No Sound from connected MIDI device.

Check the following points.

• Is the instrument set to transmit MIDI messages?

•

 

In Patch Mode

 

Kbd Patch Rx/Tx Channel parameter (Keyboard part) (p. 230)

Pad Patch Rx/Tx Channel (Pad part) (p. 230)

•

 

In Performance Mode

 

KBD switch -> Performance Layer, Mixer screen/KBD

Exclusive messages are not received.

Check the following points.

• Is the instrument set to receive Exclusive messages?

Set the Rx Exclusive parameter to “ON” (p. 231).

• Does the Device ID number of the transmitting device match 

the Device ID number of the Fantom-X?

Check the Device ID parameter (p. 230).

• Are you attempting to write to the User area? Data can be 

written to the User area only in Librarian mode.

I connected an external sequencer or MIDI keyboard to the 

MIDI IN connector, and attempted to play a Fantom-X rhythm 
set, but there was no sound. Why?

Check to make sure that the MIDI Transmit channel of the 

external MIDI device and the Fantom-X’s MIDI Receive channel 
are matched. The MIDI Receive channel used by the Fantom-X 
in Patch mode is set with the Kbd Patch RX/TX Channel 
parameter (keyboard part) and Pad Patch RX/TX Channel 
parameter (pad part). Rhythm Set performance data is generally 
received on MIDI Channel 10.

Messages from MIDI IN are not being received.

Additionally, the MIDI IN connector cannot be used if USB 

mode (p. 218) is set to MIDI. Set the USB mode to Storage.

When using sequencing software, operating the knobs or other 

controls does not affect the sound.

For some sequencing programs, System Exclusive messages are 

not transmitted by the Thru function. If you are using such 
sequencer software and want to record system exclusive 
messages, turn on the following parameters.

•

 

In Patch Mode

 

Local Switch parameter (p. 229).

•

 

In Performance Mode

 

KBD switch (p. 101).

When the Bend Range for a Patch is increased (48), the pitch 

does not rise sufficiently, even when a MIDI Pitch Bend 
message is received.

While Patch Bend Ranges can be set anywhere between 0 and 

48, when certain Waves in which the pitch is raised (in the + 
direction) are used, the pitch may stop rising at a fixed point, 
rather than continuing to go up. Although a value of 12 is 
ensured for the upper limit of raised pitches, use caution when 
setting the Bend Range above this figure.

 

Issues Related to MIDI and 

External Devices

Fantom-X678_r_e.book 253 ページ ２００５年５月１２日　木曜日　午後４時４０分

Содержание Fantom-X6





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fantom-X6

Sven Multimedia EL 4002 User Manual preview
Multimedia EL 4002
Бренд: Sven Страницы: 6
Life Fitness Video Gaming Accessories User Manual preview
Video Gaming Accessories
Бренд: Life Fitness Страницы: 51
Waterstars Waterstars Storm User Manual preview
Waterstars Storm
Бренд: Waterstars Страницы: 6
Kogan KAMKBBNTKLA Quick Start Manual preview
KAMKBBNTKLA
Бренд: Kogan Страницы: 2
Metra Electronics 99-5825S Installation Instructions Manual preview
99-5825S
Бренд: Metra Electronics Страницы: 8
APLIC 302093 User Manual preview
302093
Бренд: APLIC Страницы: 20
ENHANCE GX-K1 User Manual preview
GX-K1
Бренд: ENHANCE Страницы: 7
Totally Wicked Rocket User Manual preview
Rocket
Бренд: Totally Wicked Страницы: 32
Totally Wicked TORNADO EX User Manual preview
TORNADO EX
Бренд: Totally Wicked Страницы: 24
Roland cakewalk A-300PRO Owner'S Manual preview
cakewalk A-300PRO
Бренд: Roland Страницы: 92
annke X4 Installation Manual preview
X4
Бренд: annke Страницы: 22
Blink Marine PowerTrack CANopen Manual preview
PowerTrack CANopen
Бренд: Blink Marine Страницы: 31
SMK-Link VersaPoint DuraKey VP6340 User Manual preview
VersaPoint DuraKey VP6340
Бренд: SMK-Link Страницы: 2
VisiKey 100-EVIK User Manual preview
100-EVIK
Бренд: VisiKey Страницы: 4
Garmin Forerunner 25 Owner'S Manual preview
Forerunner 25
Бренд: Garmin Страницы: 14
Kawai FS730 Owner'S Manual preview
FS730
Бренд: Kawai Страницы: 8
SAMES KREMLIN PPH 707 CHEM ICWB M TI User Manual preview
PPH 707 CHEM ICWB M TI
Бренд: SAMES KREMLIN Страницы: 53
Sandstrom SKBWHITEBT Instruction Manual preview
SKBWHITEBT
Бренд: Sandstrom Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды