manualshive.com logo in svg

Roland Fantom-X6, Руководство пользователя

Roland Fantom-X6 - высококачественная рабочая станция с мощными функциями. Владельческое руководство доступно для загрузки бесплатно на manualshive.com. Этот мануал поможет вам раскрыть все возможности инструмента и создать уникальные музыкальные произведения. Не упустите шанс скачать свой экземпляр сейчас!

Поделиться
Скачать
background image

 

230

Settings Common to All Modes (System Function)

 

Output Gain

 

This adjusts the output gain from the Fantom-X’s Analog Out and 
Digital Out. When, for example, there are relatively few voices being 
sounded, boosting the output gain can let you attain the most 
suitable output level for recording and other purposes.

 

Value:

 

 -12–+12

 

Mix/Parallel

 

Specifies how the sound of the entire Fantom-X will be output.

 

Value

MIX:

 

 Set this to have the collective output of all sounds output from 

the OUTPUT A (MIX) jacks. When you want to check the final 
overall sound being output, set to MIX.

 

Sounds which are set in the respective Output Assign to be 
output from the INDIVIDUAL 3 jack are output from the left 
OUTPUT A (MIX) jack; sounds which are set to be output from 
the INDIVIDUAL 4 jack are output from the right OUTPUT A 
(MIX) jack.

 

Sounds output from the PHONES jack are the same as those 
output from the OUTPUT A (MIX) jacks. Therefore, any sounds 
set with Output Assign to be output from the OUTPUT B jacks 
is not output from the PHONES jack. Be sure to have any sound 
you want to hear through the headphones set to “MIX.”

 

PARALLEL:

 

 Output according to each Output Assign settings.

 

Master Key Shift

 

Shifts the overall pitch of the Fantom-X in semitone steps.

 

Value:

 

 -24– +24

 

Patch Remain (Patch Remain Switch)

 

Specifies whether currently sounding notes will continue sounding 
when another patch or rhythm set is selected (ON), or not (OFF).

Also, when this is “ON,” changes produced by incoming MIDI 
messages such as Volume or Pan (CC 5, 7, 10, 65, 68, 71–74, RPN 0, 1, 
2, MONO ON, POLY ON), as well as tonal quality and volume 
changes produced by the various controllers will be inherited.

 

Value:

 

 OFF, ON

 

Effects settings change as soon as you switch to a new patch or 
rhythm set, without being influenced by the Patch Remain 
setting. Because of this, certain effects settings can cause notes 
that were until then sounding to no longer be heard, even 
though Patch Remain has been set to on.

 

Device ID (Device ID Number)

 

When you want to transmit or receive System Exclusive messages, 
set this parameter to match the Device ID number of the other MIDI 
device.

 

Value:

 

 17–32

 

Performance Control Channel

 

Performance Ctrl Ch selects the MIDI receive channel used during 
switching of performances when MIDI messages (Program Change/
Bank Select) are sent from an external MIDI device. Set this to “OFF” 
if performances are not to be switched from an external MIDI device.

 

Value:

 

 1–16, OFF

 

If only a program change is received, and if the Performance 
Ctrl Ch parameter setting coincides with the MIDI receive 
channel of a part, priority will be given to switching the 
performance.

 

Kbd Patch Rx/Tx Ch (Keyboard Patch Receive/
Transmit Channel)

 

Specifies the channel used to transmit and receive MIDI messages 
for the Keyboard part in Patch mode.

 

Value:

 

 1–16

 

Pad Patch Rx/Tx Ch (Pad Patch Receive/
Transmit Channel)

 

Specifies the channel used to transmit and receive MIDI messages 
for the Pad part in Patch mode.

 

Value:

 

 1–16

 

Transmit Program Change (Transmit Program 
Change Switch)

 

Specifies whether Program Change messages will be transmitted 
(ON) or not (OFF).

 

Value:

 

 OFF, ON

 

Transmit Bank Select (Transmit Bank Select 
Switch)

 

Specifies whether Bank Select messages will be transmitted (ON) or 
not (OFF).

 

Value:

 

 OFF, ON

 

Transmit Active Sensing (Transmit Active 
Sensing Switch)

 

Specifies whether Active Sensing messages will be transmitted (ON) 
or not (OFF).

 

Value:

 

 OFF, ON

 

Transmit Edit Data (Transmit Edit Data Switch)

 

Specify whether changes you make in the settings of a patch, 
performance will be transmitted as system exclusive messages (ON), 
or will not be transmitted (OFF).

 

Value:

 

 OFF, ON

 

MIDI

Fantom-X678_r_e.book 230 ページ ２００５年５月１２日　木曜日　午後４時４０分

Содержание Fantom-X6





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fantom-X6

BH FITNESS G2465 Manual preview
G2465
Бренд: BH FITNESS Страницы: 45
The Singing Machine Electronic 32-Key Keyboard SMB-539 Instruction Manual preview
Electronic 32-Key Keyboard SMB-539
Бренд: The Singing Machine Страницы: 2
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Бренд: Saab Страницы: 15
Kurzweil PC3A User Manual preview
PC3A
Бренд: Kurzweil Страницы: 423
Casio CDP-130 Service Manual & Parts Manual preview
CDP-130
Бренд: Casio Страницы: 42
BTC 8190UX Quick Installation Manual preview
8190UX
Бренд: BTC Страницы: 8
Volkswagen 3C0 054 630 Assembly Instructions Manual preview
3C0 054 630
Бренд: Volkswagen Страницы: 44
Logitech K480 User Manual preview
K480
Бренд: Logitech Страницы: 19
Split Phantom ULB21-DLP Installation And Instruction Manual preview
ULB21-DLP
Бренд: Split Phantom Страницы: 20
Samsung EJ-CT800 User Manual preview
EJ-CT800
Бренд: Samsung Страницы: 14
Samsung BKB-10 Quick Manual preview
BKB-10
Бренд: Samsung Страницы: 3
Samsung A3LBKB-A User Manual preview
A3LBKB-A
Бренд: Samsung Страницы: 22
Samsung EF-DT500 Instructions Manual preview
EF-DT500
Бренд: Samsung Страницы: 39
Samsung EE-BT550 Manual preview
EE-BT550
Бренд: Samsung Страницы: 37
Samsung EJ-BT230 Manual preview
EJ-BT230
Бренд: Samsung Страницы: 55
Samsung EBE0388137D7 Manual preview
EBE0388137D7
Бренд: Samsung Страницы: 56
Samsung EJ-FT830 Quick Start Manual preview
EJ-FT830
Бренд: Samsung Страницы: 79
Samsung EJ-FT720 User Manual preview
EJ-FT720
Бренд: Samsung Страницы: 80

Бренды по названию

Популярные бренды

Загрузить еще бренды