47
Editing a Tone
3.
Move the cursor to “Inst Number” and select
an instrument.
Change the instrument if necessary . Instruments are preset
drum sounds, and changing the instrument affects the
parameters below the “INST COMMON” tab . It’s useful to select an
instrument that’s close to what you have in mind, and then edit
it individually .
4.
Move the cursor to the desired parameter and
edit the value.
Tab
Explanation
KIT COMMON
Settings for the entire kit .
KIT MFX
Settings for the multi-effect applied to the entire kit .
KIT MFX CTRL
Settings for controlling MFX via MIDI .
KIT COMP1–6
Settings for compressors 1–6 applied to the kit .
*
These are valid only when using a Drum Kit tone in a zone that is
assigned as the Drum Kit Comp Zone.
KEY PARAM
Basic settings for each key .
KEY EQ
Equalizer settings for each key .
INST COMMON
Basic settings for each instrument .
INST WAVE
Settings for the waveform that is the basis of the instrument .
INST WMT
Settings for playing different instruments depending on
velocity .
PITCH ENV
Settings for the pitch envelope .
INST FILTER
Settings related to the filter .
FILTER ENV
Settings for the filter envelope .
INST AMP
Settings related to volume .
AMP ENV
Settings for the amp envelope .
You can use the [INC] [DEC] buttons and the [VALUE] dial to edit
the value while maintaining the value difference between waves .
V-Piano Tone
(TONE TYPE: VPno)
NOTE
V-Piano tones can be selected only for ZONE 1 .
MFX
Piano
Designer
Tuning
Level
Character
1.
Select a tone whose tone type is “VPno,” press
the [MENU] button and then touch <TONE
EDIT>.
The TONE EDIT PRO screen appears . (V-Piano tones use only the
PRO screen .)
Menu
Explanation
[E1] knob
Scrolls up or down through the tabs .
[E2] knob
Scrolls the cursor up/down to select a parameter .
[E6] knob
Edits the parameter selected by the cursor .
<UTILITY>
Accesses the UTILITY window .
2.
Move the cursor to the desired parameter and
edit the value.
3.
Edit the “TUNING,” “LEVEL,” and “CHARACTER”
values for each key.
Selected key
Play the keyboard to select a key . The currently selected
key is indicated in green . Parameter values for each key are
shown graphically .
Содержание FANTOM Series
