Roland FANTOM Series, Справочное руководство

Страница: 37 / 132

37
Playing the General-Purpose Controllers
Using Other General-Purpose
Controllers
In addition to the sliders and control knobs, the pitch bend/
modulation lever, pedal switches and expression pedals
connected to the PEDAL jacks, WHEEL 1–2, and the [S1]–[S3]
buttons can be used as general-purpose controllers . You can
assign various functions or parameters to these controllers .
* The functions operated by the pitch bend/modulation lever and the
HOLD/R jack are fixed.
1.
Use the [ZONE 1-8/9-16] button to select the
zones that you want to work with (ZONE 1–
ZONE 8 or ZONE 9–ZONE 16).
2.
Select the current zone.
If necessary, make layer settings as well .
3.
Operate a general-purpose controller.
The sound changes according to the assigned function .
Button Explanation
Pitch bend lever
Varies the pitch . Other functions cannot be assigned .
Modulation lever
Transmits control change CC#01 to apply vibrato . Other
functions cannot be assigned .
PEDAL jack
(CTRL 1,
CTRL 2/L, CTRL 3/C)
Connect pedal switches or expression pedals to these
jacks to use them . Various functions can be assigned .
Operate a pedal to use the assigned function .
PEDAL jack
(HOLD/R)
Connect a pedal switch to this jack to use it . This can
be used as a damper pedal . Other functions cannot be
assigned .
WHEEL1
WHEEL2
Various parameters and functions can be assigned . To use
the assigned function, move the wheel while you play .
[S1]–[S3] button
Various parameters and functions can be assigned .
To use the assigned function, press the button .
MEMO
5
Operating these general-purpose controllers affects the zone(s) that
are heard when you play the keyboard . (If you’re using layered settings,
multiple zones are affected . If you’re not using layered settings, the
current zone is affected .)
5
The functions assigned to these general-purpose controllers can be
specified for the entire system or individually for each scene . A system
setting determines whether the system-wide settings or the individual
scene settings are used .
Parameter Explanation
Pedal Assign
Source
Specifies whether the functions controlled by a pedal
connected to the PEDAL CTRL 1, 2/L, and 3/C jacks are
specified by the system settings (SYS) or by the settings
of the scene (SCENE) .
Wheel Assign
Source
Specifies whether the functions controlled by the wheels
are specified by the system settings (SYS) or by the
settings of the scene (SCENE) .
S1-S3 Assign
Source
Specifies whether the functions controlled by the [S1],
[S2], and [S3] buttons are specified by the system settings
(SYS) or by the settings of the scene (SCENE) .
* Because the functions of the pitch bend/modulation lever and
the PEDAL HOLD/R jack are fixed, there is no setting screen for
their assignments.
For details on the setting screens and their operation, refer to
“System Parameters” (p . 112) .
MEMO
By holding down the [SHIFT] button and operating the WHEEL 1–2,
[S1]–[S3] button, or a pedal connected to the PEDAL CTRL 1, 2/L, 3/C
jack you can access the setting screen for assigning a parameter or
function. For details, refer to “Parameter Guide” (PDF) or “System
Parameters” (p. 112).