9
Panel Descriptions
3
Common section
Controller
Explanation
[WRITE] button
The WRITE screen appears .
Saves a scene or tone .
[MASTER FX] button
The MASTER FX screen appears . If you hold down the
[SHIFT] button and press this button, the MASTER EQ
editing screen appears .
[ANALOG FILTER] button
Accesses the analog filter editing screen .
[MOTIONAL PAD] button
The MOTIONAL PAD screen appears .
[DAW CTRL] button
Lets you use this unit as a DAW controller .
[MENU] button
The MENU screen appears .
Display
Shows various information depending on operation .
FUNCTION knobs [E1]–
[E6]
Turning a knob modifies the function or parameter
value that is shown below in the screen . Pressing a
knob has the same result as a button operation .
[TEMPO] button
The TEMPO screen appears .
You can set the tempo by repeatedly pressing the
button at the desired interval .
[SHIFT] button
Accesses the corresponding edit screen when pressed
together with another button .
[VALUE] dial
Changes a value .
If you hold down the [SHIFT] button and turn the dial,
the value changes more greatly .
[DEC] [INC] buttons
Changes a value .
If you press one of these buttons while holding down
the other, the value changes more rapidly . If you press
one of these buttons while holding down the [SHIFT]
button, the value changes more greatly .
Cursor [
H
] [
I
] [
K
] [
J
]
buttons
Move the cursor position up/down/left/right .
These buttons also switch between screens .
[EXIT] button
This button returns to the previous screen or closes the
open window .
[ENTER] button
Used to confirm a value, execute an operation, or view
lists or other items .
4
Scene section
Controller
Explanation
[SCENE SELECT] button
The SCENE SELECT screen appears .
Here you can select a scene .
[SCENE CHAIN] button
The SCENE CHAIN screen appears .
This lets you recall scenes in a specified order .
[ZONE VIEW] button
The ZONE VIEW screen appears .
Here you can check the state of each zone .
[SINGLE TONE] button
Recalls a piano sound to zone 1 . Zones other than 1 are
turned off .
NOTE
Note that when you press this button, unsaved scene
settings are lost .
5
OSC (Oscillator) section
Controller
Explanation
[TYPE] knob
Specifies the OSC type .
[VALUE] knob
Lets you make OSC-related settings .
[PARAM] button
Accesses the OSC setting screen of the TONE EDIT
ZOOM screen .
6
FILTER section
Controller
Explanation
[CUTOFF] knob
Specifies the cutoff
frequency of filter .
Type:LPF
CUTOFF
RESONANCE
[RESONANCE] knob
Specifies the resonance
of filter .
[FILTER TYPE] button
Specifies the type of filter .
[PARAM] button
Accesses the FILTER setting screen of the TONE EDIT
ZOOM screen .
7
ENV/AMP section
Controller
Explanation
[PITCH ENV] button
Use the [A] [D] [S] [R] knobs to edit the pitch envelope
(time-varying change in pitch) .
[FILTER ENV] button
Use the [A] [D] [S] [R] knobs to edit the filter envelope
(time-varying change in cutoff frequency) .
[AMP ENV] button
Use the [A] [D] [S] [R] knobs to edit the amp envelope
(time-varying change in volume) .
[A] knob
Specifies the attack time
of the envelope .
[D] knob
Specifies the decay time
of the envelope .
[S] knob
Specifies the sustain
level of the envelope .
[R] knob
Specifies the release
time of the envelope .
[AMP LEVEL] knob
Adjusts the volume .
[PARAM] button
Accesses the TONE EDIT screen . The screen that appears
depends on the PITCH, FILTER, or AMP parameters that
are selected .
8
EFFECTS section
Controller
Explanation
[TYPE] knob
Specifies the MFX TYPE of the selected zone .
[DEPTH] knob
Specifies the MFX DEPTH of the selected zone .
[PARAM] button
Accesses the MFX screen of EFFECTS EDIT .
9
Sequencer section
Controller
Explanation
TONE CATEGORY buttons
[1]–[16]
Select tones in each category .
Depending on the situation, these buttons are also
used for other things such as TR-REC input or as a
selector for the SCENE CHAIN function .
[
9
STOP] button
Stops pattern playback or recording, or stops playback
of the group or song .
[
A
PLAY] button
Plays the pattern, group, or song .
[
7
REC] button
Enters the record-standby condition .
[TR-REC] button
Enables TR-REC . (p . 89)
[PATTERN] button
The PATTERN screen appears .
[GROUP] button
The GROUP screen appears .
[SONG] button
The SONG screen appears .
[RHYTHM PATTERN]
button
The RHYTHM PATTERN screen appears .
10
Pad section
Controller
Explanation
[HOLD] button
Turns hold on/off (allowing the sound to continue even
after you release the pad) .
[BANK] button
Switches the pad bank .
[CLIPBOARD] button
Lets you move or copy a sample from one pad to
another .
[PAD MODE] button
Specifies the functions that are assigned to the pads .
Hold down the [SHIFT] button and press this button
to access the edit screen for the currently selected pad
mode and related screens .
[SAMPLING] button
Lets you sample .
Pads [1]–[16]
Play the samples assigned to each pad .
You can make pad mode settings to assign various
functions to the pads .
Содержание FANTOM Series
