Roland FANTOM Series, Справочное руководство

Страница: 44 / 132

44
Editing a Scene (Zone)
Editing a Scene’s Appearance
Here you can use a dedicated screen to make various settings
such as the appearance and a memo for each scene .
1.
Select a scene.
2.
Touch <EDIT>.
Memo
Rating Level
Color
The EDIT screen appears .
Menu Explanation
[E3] MEMO
Enter a memo that is shown below the scene name . You can
enter up to 64 characters .
Scene Rating
[E4] knob
Adds star symbols to the scene icon . You can add stars to rate
your favorite scenes . (Range: 0–3)
Scene Color
[E5] knob
Changes the color of the scene icon . (Range: 1–16)
Scene Level
[E6] knob
Specifies the volume of the scene . This is the same as the
“Scene Level” in the GENERAL tab of the scene parameters .
(Range: 0–127) The Scene Level value is shown on the scene
icon .
<WRITE> Overwrites the settings onto the current scene .
3.
Select the desired parameter, and edit its
value.
To enter a memo, select [E3] MEMO and the RENAME screen
appears .
Enter a memo as described in the directions for the RENAME
screen (p . 13) .
4.
When you have finished editing, touch
<WRITE>.
The settings are overwritten onto the current scene, and you
return to the SCENE screen .
Saving a Scene
The edited zone and tone settings, and the recorded data, are
temporary . They will be lost if you turn off the power or select
another scene or tone . If you want to keep your edited settings
or recorded data, save them as follows .
NOTE
When you save, the data previously located in the save-destination is
overwritten .
1.
Press the [WRITE] button.
The WRITE MENU screen appears .
2.
Touch <SCENE>.
The SCENE WRITE screen appears .
3.
If you want to edit the name, select [E1]
RENAME and edit the name.
Enter a name as described in the directions for the RENAME
screen .
When you have finished editing the name, select [E6] OK to close
the window .
4.
Use the [VALUE] dial or the [DEC] [INC] buttons
to select the save-destination.
5.
Select [E6] OK.
A confirmation message appears .
If you decide to cancel, choose [E5] CANCEL .
6.
Select [E5] OK.
The scene is saved .
Items that are saved as scene data
The following settings and data are saved in the scene .
5
Overall settings for the entire scene (scene parameters)
5
Settings for each zone (zone parameters)
5
Settings related to the appearance of a scene, such as memo and
rating.
5
Arpeggio settings
5
Chord memory settings
5
Rhythm pattern settings
5
Pad settings
5
Effect settings shared by all zones (IFX1, IFX2, REVERB, CHORUS, Analog Filter)
5
Sequencer pattern data
5
Sequencer group data
5
Sequencer song data