AEP-CHS-20191117 6
Do not wipe with a damp cloth.
It may cause electric shock or fire due to short circuit.
After cleaning, check to make sure the power cord is not damaged or overheated, and that the
plug is securely inserted.
Avoid use in places exposed to direct sunlight, high heat, or extreme cold.
Avoid using in places with high vibration.
Do not use excessive force to push or tilt the AEP printer.
It may cause injury or damage the floor.
Use AEP printer only for prototype production.
Use only 3D printing materials provided with the AEP Series 3D Printer from ROKIT Healthcare
or materials approved by ROKIT Healthcare.
Using unapproved materials may result in poor print quality or printer failure, in which case
ROKIT Healthcare will not support any repairs