Rokit AEP II Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 45

Rokit AEP II Скачать руководство пользователя страница 36

AEP-CHS-20191117 36

6. Click on the “slicing” button generates the g-code.
Save the file clicking “save”.



NewCreatorK can be downloaded from the homepage www.rokithealthcare.com.



For a detailed guide on NewCreatorK software operations, refer to the NewCreator K User
Manual.

10.7 Printing (4 Methods)



Print from an external USB hard drive

1.

Mount an external USB hard drive to the port located on the upper right-hand side of the
printer

2.

On the LCD display NewCreatorK Home Screen, click FILE PRINT > USB.

3.

Select the g-code file of your choice. The printer will start printing.



Print from PC using a USB cable

1.

Open the NewCreatorK software on the PC. Press the CONNECT icon on the orange
NewCreatorK icon menu.

2.

In the IP address box, enter 192.168.7.2 (default USB cable IP address). Press CONNECT.

3.

If connected properly, you will see the printer state to be “OPERATIONAL”. Use the UPLOAD
button to upload g-code files from the PC to the printer.



Print from PC using Wi-Fi

*Make sure that the printer is already connected to the Wi-Fi server.

1.

On the LCD display NewCreatorK Home Screen, click SETTING > NETWORK tab

2.

Identify the WI-FI NETWORK IP.

3.

On the NewCreatorK software on PC, go to [Connect] icon.

4.

In the IP address box (NewCreatorK software > CONNECT), enter the network IP address
192.168.0.XXX. Press CONNECT.

5.

If connected properly, you will see the printer state to be “OPERATIONAL”. Use the UPLOAD
button to upload g-code files from the PC to the printer.

«
...
34
35
36
37
38
...
»

Содержание AEP II














































Отзывы:

Нет отзывов