Rockwell ShopSeries RC3031K, Руководство пользователя

Страница: 7 / 24

7
4.5A HAND DRILL ENG
SYMBOLS
Read the manual
Warning
Use inside only
Do not expose to rain or water
Do not burn
Wear safety goggles, dust mask and ear
protection
Double insulation
EXTENSION CORDS
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage, resulting in loss of power and overheating.
The following table shows the correct size to use
depending on cord length and nameplate ampere
rating. If in doubt, use the next heavier gauge. The
smaller the gauge number, the heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Tool’s
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
Cord Size in A.W.G. Wire Sizes in mm 2
Cord Length in Feet
25 50 100 150
Feet to Meters
15 30 60 120
18 16 16 14
18 16 14 12
18 16 14 12
16 16 14 12
14 12 - -
.75 .75 1.5 2.5
.75 1.0 2.5 4.0
.75 1.0 2.5 4.0
1.0 2.5 4.0 -
- - - -
RC3031K PDN500AU 060427.indd 7 2006-7-19 16:32:07